[PATCH v1 2/9] dt/bindings: drm/komeda: Add DT bindings for ARM display processor D71

["james qian wang (Arm Technology China)" <james.qian.wang@arm.com>]

Add DT bindings documentation for the ARM display processor D71 and later
IPs.

Signed-off-by: James (Qian) Wang <james.qian.wang@arm.com>
---
 .../bindings/display/arm/arm,komeda.txt       | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/arm/arm,komeda.txt

diff --git a/Documentation/devicetree/bindings/display/arm/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
new file mode 100644
index 000000000000..d4b53c11b2a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
@@ -0,0 +1,87 @@
+Device Tree bindings for ARM Komeda display driver
+
+Required properties:
+- compatible: Should be "arm,mali-d71"
+- reg: Physical base address and length of the registers in the system
+- interrupts: the interrupt line numbers of the device in the system
+- interrupt-names: contains the names of the IRQs in the order they were
+    provided in the "interrupts" property. Must contain: "DPU".
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+- clock-names: A list of clock names. It should contain:
+      - "pclk": for the APB interface clock
+      - "mclk": for the main processor clock
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Required properties for sub-node: pipeline@nq
+Each device contains one or two pipeline sub-nodes (at least one), each
+pipeline node should provide properties:
+- reg: Zero-indexed identifier for the pipeline
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+- clock-names: should contain:
+      - "aclk": AXI interface clock
+      - "pxclk": pixel clock
+
+- port: each pipeline connect to an encoder input port. The connection is
+    modelled using the OF graph bindings specified in
+    Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for the framebuffer; if not present, the framebuffer may
+    be located anywhere in memory.
+
+Example:
+/ {
+...
+
+dp0: display@c00000 {
+#address-cells = <1>;
+#size-cells = <0>;
+compatible = "arm,mali-d71";
+reg = <0xc00000 0x20000>;
+interrupts = <0 168 4>;
+interrupt-names = "DPU";
+clocks = <&dpu_mclk>, <&dpu_aclk>;
+clock-names = "mclk", "pclk";
+
+pl0: pipeline@0 {
+clocks = <&fpgaosc2>, <&dpu_aclk>;
+clock-names = "pxclk", "aclk";
+reg = <0>;
+
+ports {
+#address-cells = <1>;
+#size-cells = <0>;
+
+port@0 {
+reg = <0>;
+dp0_pl0_out: endpoint {
+remote-endpoint = <&db_dvi0_in>;
+};
+};
+};
+};
+pl1: pipeline@1 {
+clocks = <&fpgaosc2>, <&dpu_aclk>;
+clock-names = "pxclk", "aclk";
+reg = <1>;
+
+ports {
+#address-cells = <1>;
+#size-cells = <0>;
+
+port@0 {
+reg = <0>;
+dp0_pl1_out: endpoint {
+remote-endpoint = <&db_dvi1_in>;
+};
+};
+};
+};
+};
+...
+};
--
2.17.1

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.