From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 2/6] arm64: add basic DTS for i.MX8MQ Date: Mon, 10 Dec 2018 16:18:26 -0600 Message-ID: <20181210221826.GA21311@bogus> References: <1544365552-30270-1-git-send-email-abel.vesa@nxp.com> <1544365552-30270-3-git-send-email-abel.vesa@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1544365552-30270-3-git-send-email-abel.vesa@nxp.com> Sender: linux-kernel-owner@vger.kernel.org Cc: Lucas Stach , "linux-arm-kernel@lists.infradead.org" , Shawn Guo , dl-linux-imx , Fabio Estevam , "devicetree@vger.kernel.org" , Aisheng Dong , Pengutronix Kernel Team , "patchwork-lst@pengutronix.de" , Linux Kernel Mailing List , Abel Vesa , Abel Vesa List-Id: devicetree@vger.kernel.org On Sun, 9 Dec 2018 14:26:07 +0000, Abel Vesa wrote: > From: Lucas Stach > > This adds the basic DTS for the i.MX8MQ. > For now only the following peripherals are supported: > - IOMUXC (pin controller) > - CCM (clock controller) > - GPIO > - UART > - uSDHC (SD/eMMC controller) > - FEC (ethernet controller) > - i2c > > This is enough to get a very basic board support up and running. > > One known limitation is that the driver for the GPC interrupt > controller is still missing, rendering the CPU sleep states unusable > as there is nothing waking them up anymore. > > Signed-off-by: Lucas Stach > Reviewed-by: Dong Aisheng > --- > Documentation/devicetree/bindings/arm/fsl.txt | 4 + > arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h | 623 +++++++++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 392 ++++++++++++++++ > 3 files changed, 1019 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq.dtsi > Reviewed-by: Rob Herring