Re: [PATCH] ARM: dts: Add am335x mcasp with l3 data port ranges

[Tony Lindgren <tony@atomide.com>]

* Tony Lindgren <tony@atomide.com> [181210 16:38]:
> * Tony Lindgren <tony@atomide.com> [181210 16:21]:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [181210 16:13]:
> > > am335x-evmsk is still not booting with this patch on top of next-20181210.
> > 
> > Oh interesting.
> 
> OK so to prevent the hwmod code from resetting gpios very
> early, this now might become necessary. Care to try with
> this also applied?

I posted two patches adding more checks for the module flags
so the patch below should no be needed any longer.

Regards,

Tony

> 8< ------------------------
> diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
> --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
> @@ -516,24 +516,8 @@ struct omap_hwmod am33xx_epwmss2_hwmod = {
>  	},
>  };
>  
> -/*
> - * 'gpio' class: for gpio 0,1,2,3
> - */
> -static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
> -	.rev_offs	= 0x0000,
> -	.sysc_offs	= 0x0010,
> -	.syss_offs	= 0x0114,
> -	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
> -			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
> -			  SYSS_HAS_RESET_STATUS),
> -	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> -			  SIDLE_SMART_WKUP),
> -	.sysc_fields	= &omap_hwmod_sysc_type1,
> -};
> -
>  struct omap_hwmod_class am33xx_gpio_hwmod_class = {
>  	.name		= "gpio",
> -	.sysc		= &am33xx_gpio_sysc,
>  	.rev		= 2,
>  };
>