From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH 0/8] This is a second edition of a series that implements voltage Date: Tue, 11 Dec 2018 07:46:54 +0000 Message-ID: <20181211074654.GF4497@dell> References: <20181211071137.k3rqwctnibg6tyc2@plaes.org> Reply-To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20181211071137.k3rqwctnibg6tyc2-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Priit Laes Cc: Rob Herring , Mark Rutland , Chen-Yu Tsai , Maxime Ripard , Liam Girdwood , Mark Brown , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Olliver Schinagl , linux-sunxi List-Id: devicetree@vger.kernel.org On Tue, 11 Dec 2018, Priit Laes wrote: > On Mon, Dec 10, 2018 at 08:42:11PM +0200, Priit Laes wrote: > > ramping for AXP209 DCDC2 and LDO3 regulators and software > > based soft-start for AXP209 LDO3 regulator. >=20 > Ugh.. managed to botch this series. I'll send a fixed one > today. While you're at it, please don't forget to add the version number in the patch subject lines. Each patch should have read "[PATCH v2] <...>" in this submission. > > Both features are needed to work around a PMIC shutdown when > > toggling LDO3 on certain boards with high capacitance on the > > LDO3 output. > >=20 > > Similar features (or workarounds) have been also implemented > > on u-boot side [1]. > >=20 > > Changes since v1: > > - Rebased on top of next and dropped already merged patches. > > - Dropped LDO4 full range devicetree change for Lime2 (prev patch 9) > > in favor of general pin-bank regulator dependency [2]. > > - Fixed paths in devicetree bindings (patch 3) > > - Added note about software based soft-start for LDO3 (patch 5) > >=20 > > [1] https://lists.denx.de/pipermail/u-boot/2018-November/348612.html > > [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-December= /618459.html > >=20 > > Olliver Schinagl (8): > > mfd: axp20x: name voltage ramping define properly > > regulator: axp20x: add support for set_ramp_delay for AXP209 > > dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AX= P209 > > regulator: axp20x: add software based soft_start for AXP209 LDO3 > > dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LD= O3 > > regulator: dts: enable soft-start and ramp delay for the OLinuXino Li= me2 > > mfd: axp20x: Clean up included headers > > mfd: axp20x: use explicit bit defines > >=20 > > Documentation/devicetree/bindings/mfd/axp20x.txt | 9 +- > > arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +- > > drivers/mfd/axp20x.c | 13 +- > > drivers/regulator/axp20x-regulator.c | 142 +++++++++++++++= - > > include/linux/mfd/axp20x.h | 4 +- > > 5 files changed, 161 insertions(+), 9 deletions(-) > >=20 > > base-commit: 14cf8c1d5b90a0cf6a8ba51ef59db8da8c7a2622 --=20 Lee Jones [=E6=9D=8E=E7=90=BC=E6=96=AF] Linaro Services Technical Lead Linaro.org =E2=94=82 Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout.