Re: [PATCH v13 0/5] Add i.MX8MQ clock driver

[Shawn Guo <shawnguo@kernel.org>]

On Thu, Nov 29, 2018 at 01:51:04PM -0800, Stephen Boyd wrote:
> Quoting Aisheng DONG (2018-11-28 23:46:41)
> > > -----Original Message-----
> > > From: Stephen Boyd [mailto:sboyd@kernel.org]
> > [...]
> > > >
> > > > Changes since v12:
> > > >  * replaced the division in clk_pll_recalc_rate in clk-frac
> > > >    with do_div as suggested by Stephen
> > > >
> > > > Abel Vesa (2):
> > > >   clk: imx: Add imx composite clock
> > > >   clk: imx: Add clock driver for i.MX8MQ CCM
> > > >
> > > > Lucas Stach (3):
> > > >   dt-bindings: add binding for i.MX8MQ CCM
> > > >   clk: imx: add fractional PLL output clock
> > > >   clk: imx: Add SCCG PLL type
> > > >
> > > 
> > > I had to apply this set of fixes to silence sparse and smatch warnings about
> > > things that are not right. Please take a look over things and see if it's sane.
> > > 
> > 
> > The change looks good to me and tested ok.
> > I did not see this patch series in your tree.
> > Do you want us to apply your changes and re-send for easy pick up?
> > 
> 
> I applied this version and my fixes. I'll just mark v14 as superseded.
> Thanks for testing!

Hi Stephen,

For the same reason as clk-imx7ulp, please keep branch clk-imx8mq
stable.  Thanks.

Shawn