From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>,
Michael Trimarchi
<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH v5 1/2] dt-bindings: panel: Add Sitronix ST7701 panel documentation
Date: Tue, 11 Dec 2018 21:13:57 +0530 [thread overview]
Message-ID: <20181211154358.25293-1-jagan@amarulasolutions.com> (raw)
Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel
with inbuilt ST7701 chip.
The default regulator names in ST7701 chip is renamed in Techstar TS8550B
so, add specific binding names for them.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v5:
- found the chip from vendor, so added new chip binding
- here is v4: https://patchwork.kernel.org/patch/10680333/
.../display/panel/sitronix,st7701.txt | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
new file mode 100644
index 000000000000..ccd17597f1f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
@@ -0,0 +1,30 @@
+Sitronix ST7701 based LCD panels
+
+ST7701 designed for small and medium sizes of TFT LCD display, is
+capable of supporting up to 480RGBX864 in resolution. It provides
+several system interfaces like MIPI/RGB/SPI.
+
+Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+inbuilt ST7701 chip.
+
+Required properties:
+- compatible: must be "sitronix,st7701" and one of
+ * "techstar,ts8550b"
+- reset-gpios: a GPIO phandle for the reset pin
+
+Required properties for techstar,ts8550b:
+- reg: DSI virtual channel used by that screen
+- VCC-supply: analog regulator for MIPI circuit
+- IOVCC-supply: I/O system regulator
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+panel@0 {
+ compatible = "techstar,ts8550b", "sitronix,st7701";
+ reg = <0>;
+ VCC-supply = <®_dldo2>;
+ IOVCC-supply = <®_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+};
--
2.18.0.321.gffc6fa0e3
next reply other threads:[~2018-12-11 15:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-11 15:43 Jagan Teki [this message]
[not found] ` <20181211154358.25293-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2018-12-11 15:43 ` [PATCH v5 2/2] drm/panel: Add Sitronix ST7701 panel driver Jagan Teki
2018-12-17 21:32 ` [PATCH v5 1/2] dt-bindings: panel: Add Sitronix ST7701 panel documentation Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181211154358.25293-1-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).