From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH v2 00/12] Bring suspend to RAM support to PCIe Aardvark driver Date: Wed, 12 Dec 2018 11:21:30 +0100 Message-ID: <20181212102142.16053-1-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Thomas Petazzoni , Bjorn Helgaas Cc: devicetree@vger.kernel.org, Rob Herring , Mark Rutland , Lorenzo Pieralisi , linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Antoine Tenart , Maxime Chevallier , Nadav Haklai , Miquel Raynal List-Id: devicetree@vger.kernel.org Hello, As part of an effort to bring suspend to RAM support to Armada 3700 SoCs (main target: ESPRESSObin), this series handles the work around the PCIe IP. First, more configuration is done in the 'setup' helper as inspired from the U-Boot driver. This is needed to entirely initialize the IP during future resume operation (patch 1). Then, reset GPIO, PHY and clock support are introduced (patch 2-4). As current device trees do not provide the corresponding properties, not finding one of these properties is not an error and just produces a warning. However, if the property is present, an error during PHY initialization will fail the probe of the driver. Note: To be sure the clock will be resumed before this driver, a first series adding links between clocks and consumers has been submitted, see [1]. Anyway, having the clock series applied first is not needed. Patch 5 adds suspend/resume hooks, re-using all the above. Finally, bindings and device trees are updated to reflect the hardware (patch 6-12). While the clock depends on the SoC, the reset GPIO and the PHY depends on the board so the clock is added in the armada-37xx.dtsi file while the two other properties are added in armada-3720-espressobin.dts. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-November/614527.html Thanks, Miquèl Changes since v1: ================= * Change the capitalization in commit titles to follow the PCI subsystem rules. * Added Suggested-by tag to the patch adding PHY support and to the patch adding the PHY property in the DT. * Added Rob's Reviewed-by tags on bindings. * I am following the discussion about calling functions that might sleep in a NOIRQ context. As there is no real problem yet (as per my understanding), I did not change anything on this regard. Miquel Raynal (12): PCI: aardvark: Configure more registers in the configuration helper PCI: aardvark: Add reset GPIO support PCI: aardvark: Add PHY support PCI: aardvark: Add clock support PCI: aardvark: Add suspend to RAM support dt-bindings: PCI: aardvark: Describe the reset-gpios property dt-bindings: PCI: aardvark: Describe the clocks property dt-bindings: PCI: aardvark: Describe the PHY property ARM64: dts: marvell: armada-37xx: declare PCIe reset pin ARM64: dts: marvell: armada-3720-espressobin: declare PCIe reset GPIO ARM64: dts: marvell: armada-37xx: declare PCIe clock ARM64: dts: marvell: armada-3720-espressobin: declare PCIe PHY .../devicetree/bindings/pci/aardvark-pci.txt | 9 + .../dts/marvell/armada-3720-espressobin.dts | 4 + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 5 + drivers/pci/controller/pci-aardvark.c | 214 ++++++++++++++++++ 4 files changed, 232 insertions(+) -- 2.19.1