[PATCH v2 0/2] arm64: dts: sdm845: Add sdm845 GPU interconnect

[PATCH v2 0/2] arm64: dts: sdm845: Add sdm845 GPU interconnect

[Jordan Crouse]

Two quick patches to document and add an interconnect port definition
for the sdm845 GPU.

This is based on the base GPU DT changes:
https://patchwork.freedesktop.org/series/39308/

As well as the DT nodes from Georgi:
https://patchwork.kernel.org/patch/10719483/

v2: Fix interconnect supplier to match latest per Doug Anderson
*** BLURB HERE ***

Jordan Crouse (2):
  dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU
  arm64: dts: sdm845: Add interconnect for GPU

 Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi                  | 3 +++
 2 files changed, 9 insertions(+)

-- 
2.18.0

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Jordan Crouse]

Add documentation for the interconnect and interconnect-names bindings
for the GPU node as detailed by bindings/interconnect/interconnect.txt.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 8d9415180c22..19b5ae459fdb 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -19,6 +19,9 @@ Required properties:
   * "mem_iface"
 - iommus: optional phandle to an adreno iommu instance
 - operating-points-v2: optional phandle to the OPP operating points
+- interconnect: optional phandle to a interconnect provider.  See
+  ../interconnect/interconnect.txt for details.
+- interconnect-names: Name string for the interconnects.
 - qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will
   control the power for the GPU
 
@@ -68,6 +71,9 @@ Example a6xx (with GMU):
 
 		operating-points-v2 = <&gpu_opp_table>;
 
+		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+		interconnect-names = "gfx-mem";
+
 		qcom,gmu = <&gmu>;
 	};
 };
-- 
2.18.0

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Doug Anderson]

Hi,

On Fri, Dec 14, 2018 at 2:16 PM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Add documentation for the interconnect and interconnect-names bindings
> for the GPU node as detailed by bindings/interconnect/interconnect.txt.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
>  1 file changed, 6 insertions(+)

Looks good to me.  This could go into Andy's tree as soon as Georgi's
series lands somewhere.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Doug Anderson]

Hi,

On Fri, Dec 14, 2018 at 3:58 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Fri, Dec 14, 2018 at 2:16 PM Jordan Crouse <jcrouse@codeaurora.org> wrote:
> >
> > Add documentation for the interconnect and interconnect-names bindings
> > for the GPU node as detailed by bindings/interconnect/interconnect.txt.
> >
> > Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> > ---
> >  Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
> >  1 file changed, 6 insertions(+)
>
> Looks good to me.  This could go into Andy's tree as soon as Georgi's
> series lands somewhere.
>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

To correct myself, this maybe should go through Georgi's tree together
with <https://patchwork.kernel.org/patch/10718587/>.  It's the actual
dts that would go into Andy's tree.

-Doug
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Rob Herring]

On Fri, Dec 14, 2018 at 03:16:39PM -0700, Jordan Crouse wrote:
> Add documentation for the interconnect and interconnect-names bindings
> for the GPU node as detailed by bindings/interconnect/interconnect.txt.
> 
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
> index 8d9415180c22..19b5ae459fdb 100644
> --- a/Documentation/devicetree/bindings/display/msm/gpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
> @@ -19,6 +19,9 @@ Required properties:
>    * "mem_iface"
>  - iommus: optional phandle to an adreno iommu instance
>  - operating-points-v2: optional phandle to the OPP operating points
> +- interconnect: optional phandle to a interconnect provider.  See
> +  ../interconnect/interconnect.txt for details.
> +- interconnect-names: Name string for the interconnects.
>  - qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will
>    control the power for the GPU
>  
> @@ -68,6 +71,9 @@ Example a6xx (with GMU):
>  
>  		operating-points-v2 = <&gpu_opp_table>;
>  
> +		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
> +		interconnect-names = "gfx-mem";

There's not really any point to having *-names when there is only 1 
value.

> +
>  		qcom,gmu = <&gmu>;
>  	};
>  };
> -- 
> 2.18.0
> 
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Jordan Crouse]

On Tue, Dec 18, 2018 at 11:22:01AM -0600, Rob Herring wrote:
> On Fri, Dec 14, 2018 at 03:16:39PM -0700, Jordan Crouse wrote:
> > Add documentation for the interconnect and interconnect-names bindings
> > for the GPU node as detailed by bindings/interconnect/interconnect.txt.
> > 
> > Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> > ---
> >  Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
> > index 8d9415180c22..19b5ae459fdb 100644
> > --- a/Documentation/devicetree/bindings/display/msm/gpu.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
> > @@ -19,6 +19,9 @@ Required properties:
> >    * "mem_iface"
> >  - iommus: optional phandle to an adreno iommu instance
> >  - operating-points-v2: optional phandle to the OPP operating points
> > +- interconnect: optional phandle to a interconnect provider.  See
> > +  ../interconnect/interconnect.txt for details.
> > +- interconnect-names: Name string for the interconnects.
> >  - qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will
> >    control the power for the GPU
> >  
> > @@ -68,6 +71,9 @@ Example a6xx (with GMU):
> >  
> >  		operating-points-v2 = <&gpu_opp_table>;
> >  
> > +		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
> > +		interconnect-names = "gfx-mem";
> 
> There's not really any point to having *-names when there is only 1 
> value.

For the moment we can only look up the path from the DT by name. I guess we
could add an lookup by index but I'm not sure if that had already been
considered and rejected.

Jordan

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH v2 1/2] dt-bindings: drm/msm/a6xx: Document interconnect properties for GPU

[Rob Herring]

On Tue, Dec 18, 2018 at 12:07 PM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> On Tue, Dec 18, 2018 at 11:22:01AM -0600, Rob Herring wrote:
> > On Fri, Dec 14, 2018 at 03:16:39PM -0700, Jordan Crouse wrote:
> > > Add documentation for the interconnect and interconnect-names bindings
> > > for the GPU node as detailed by bindings/interconnect/interconnect.txt.
> > >
> > > Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> > > ---
> > >  Documentation/devicetree/bindings/display/msm/gpu.txt | 6 ++++++
> > >  1 file changed, 6 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
> > > index 8d9415180c22..19b5ae459fdb 100644
> > > --- a/Documentation/devicetree/bindings/display/msm/gpu.txt
> > > +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
> > > @@ -19,6 +19,9 @@ Required properties:
> > >    * "mem_iface"
> > >  - iommus: optional phandle to an adreno iommu instance
> > >  - operating-points-v2: optional phandle to the OPP operating points
> > > +- interconnect: optional phandle to a interconnect provider.  See
> > > +  ../interconnect/interconnect.txt for details.
> > > +- interconnect-names: Name string for the interconnects.
> > >  - qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will
> > >    control the power for the GPU
> > >
> > > @@ -68,6 +71,9 @@ Example a6xx (with GMU):
> > >
> > >             operating-points-v2 = <&gpu_opp_table>;
> > >
> > > +           interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
> > > +           interconnect-names = "gfx-mem";
> >
> > There's not really any point to having *-names when there is only 1
> > value.
>
> For the moment we can only look up the path from the DT by name. I guess we
> could add an lookup by index but I'm not sure if that had already been
> considered and rejected.

You don't have to support lookup by index, just support a NULL name.

Rob
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[PATCH v2 2/2] arm64: dts: sdm845: Add interconnect for GPU

[Jordan Crouse]

Define an interconnect port for the GPU to set bus
capabilities.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a5ddfc4c59b..2acfea87716c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1370,6 +1370,9 @@
 
 			operating-points-v2 = <&gpu_opp_table>;
 
+			interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			qcom,gmu = <&gmu>;
 
 			gpu_opp_table: opp-table {
-- 
2.18.0

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

Re: [PATCH v2 2/2] arm64: dts: sdm845: Add interconnect for GPU

[Doug Anderson]

Hi,

On Fri, Dec 14, 2018 at 2:16 PM Jordan Crouse <jcrouse@codeaurora.org> wrote:
>
> Define an interconnect port for the GPU to set bus
> capabilities.
>
> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
>  1 file changed, 3 insertions(+)

Looks good to me.  This could go into Andy's tree as soon as Georgi's
series lands somewhere.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno