[v12 1/3] arm: dts: ls1021a: add qdma device tree nodes

[v12 1/3] arm: dts: ls1021a: add qdma device tree nodes

[Peng Ma]

add the qDMA device tree nodes for LS1021A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
change in v12:
	- no 

 arch/arm/boot/dts/ls1021a.dtsi |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index bdd6e66..b3d7807 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -812,5 +812,25 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
+
+		qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 };
-- 
1.7.1

[PATCH 2/3] arm64: dts: ls1043a: add qdma device tree nodes

[Peng Ma]

add the qDMA device tree nodes for LS1043A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
change in v12:
	- used GIC_SPI and IRQ_TYPE_LEVEL_HIGH to instead immediate
	number

 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3fed504..23b78df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -734,6 +734,28 @@
 					<0000 0 0 3 &gic 0 156 0x4>,
 					<0000 0 0 4 &gic 0 157 0x4>;
 		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 
 	firmware {
-- 
1.7.1

[PATCH 3/3] arm64: dts: ls1046a: add qdma device tree nodes

[Peng Ma]

add the qDMA device tree nodes for LS1046A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
change in v12:
	- used GIC_SPI and IRQ_TYPE_LEVEL_HIGH to instead immediate
	number

 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 51cbd50..8fcce79 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -704,6 +704,27 @@
 					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 
 	reserved-memory {
-- 
1.7.1

RE: [PATCH 3/3] arm64: dts: ls1046a: add qdma device tree nodes

[Peng Ma]

Hi shawnguo,

I send this series patch to http://patchwork.ozlabs.org/project/devicetree-bindings/list/
But I did not find patchs on devicetree patchwork, could I send patchs again.
Thanks.

Best Regards, 
Peng
>-----Original Message-----
>From: Peng Ma <peng.ma@nxp.com>
>Sent: 2018年12月6日 19:18
>To: vkoul@kernel.org; shawnguo@kernel.org
>Cc: Leo Li <leoyang.li@nxp.com>; robh+dt@kernel.org;
>mark.rutland@arm.com; linux-arm-kernel@lists.infradead.org;
>devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Peng Ma
><peng.ma@nxp.com>; Wen He <wen.he_1@nxp.com>
>Subject: [PATCH 3/3] arm64: dts: ls1046a: add qdma device tree nodes
>
>add the qDMA device tree nodes for LS1046A devices.
>
>Signed-off-by: Wen He <wen.he_1@nxp.com>
>Signed-off-by: Peng Ma <peng.ma@nxp.com>
>---
>change in v12:
>	- used GIC_SPI and IRQ_TYPE_LEVEL_HIGH to instead immediate
>	number
>
> arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi |   21
>+++++++++++++++++++++
> 1 files changed, 21 insertions(+), 0 deletions(-)
>
>diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>index 51cbd50..8fcce79 100644
>--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>@@ -704,6 +704,27 @@
> 					<0000 0 0 4 &gic GIC_SPI 154
>IRQ_TYPE_LEVEL_HIGH>;
> 		};
>
>+		qdma: dma-controller@8380000 {
>+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
>+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
>+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
>+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
>+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
>+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
>+			interrupt-names = "qdma-error", "qdma-queue0",
>+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
>+			dma-channels = <8>;
>+			block-number = <1>;
>+			block-offset = <0x10000>;
>+			fsl,dma-queues = <2>;
>+			status-sizes = <64>;
>+			queue-sizes = <64 64>;
>+			big-endian;
>+		};
>+
> 	};
>
> 	reserved-memory {
>--
>1.7.1

Re: [PATCH 3/3] arm64: dts: ls1046a: add qdma device tree nodes

[Shawn Guo]

On Fri, Dec 14, 2018 at 10:30:15AM +0000, Peng Ma wrote:
> Hi shawnguo,
> 
> I send this series patch to http://patchwork.ozlabs.org/project/devicetree-bindings/list/
> But I did not find patchs on devicetree patchwork, could I send patchs again.

You do not need to.  I have sent the series for 4.21 inclusion.  I
forgot to reply and let you know.  Sorry.

Shawn

Re: [PATCH 3/3] arm64: dts: ls1046a: add qdma device tree nodes

[Peng Ma]

[-- Attachment #1: Type: text/plain, Size: 1218 bytes --]

OK, Got it, Thanks very much.

Best Regards,
Peng

<https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?ftlId=1&name=peng.ma&uid=peng.ma%40nxp.com&iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&items=%5B%22%E9%82%AE%E7%AE%B1peng.ma%40nxp.com%22%5D>
[https://mail-online.nosdn.127.net/qiyelogo/defaultAvatar.png]
peng.ma

邮箱peng.ma@nxp.com


签名由 网易邮箱大师<https://mail.163.com/dashi/dlpro.html?from=mail88> 定制

On 12/16/2018 15:45, Shawn Guo<mailto:shawnguo@kernel.org> wrote:
On Fri, Dec 14, 2018 at 10:30:15AM +0000, Peng Ma wrote:
> Hi shawnguo,
>
> I send this series patch to https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fdevicetree-bindings%2Flist%2F&amp;data=02%7C01%7Cpeng.ma%40nxp.com%7Caee2c0d17a174b69a38408d6632a6785%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636805431110753331&amp;sdata=hxxSlCQp%2Fa48J0zaz2oZ8u9qp%2By%2B%2BymOD9l5%2FYLrQPU%3D&amp;reserved=0
> But I did not find patchs on devicetree patchwork, could I send patchs again.

You do not need to.  I have sent the series for 4.21 inclusion.  I
forgot to reply and let you know.  Sorry.

Shawn

[-- Attachment #2: Type: text/html, Size: 4253 bytes --]