[PATCH v4 1/8] dt-bindings: stmpe: reformatting parameter list and use tabs only

[PATCH v4 1/8] dt-bindings: stmpe: reformatting parameter list and use tabs only

[Philippe Schenker]

This patch reformats the parameter list for stmpe device in a
table-style so it is more clear to read.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v4:
 - New separate precursor patch for holding reformatting

Changes in v3: None
Changes in v2: None

 .../bindings/input/touchscreen/stmpe.txt      | 52 ++++++++++++-------
 .../devicetree/bindings/mfd/stmpe.txt         | 14 ++---
 2 files changed, 41 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index 127baa31a77a..1d3f84308142 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -5,24 +5,40 @@ Required properties:
  - compatible: "st,stmpe-ts"
 
 Optional properties:
-- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
-  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
-  -> 144 clocks), recommended is 4.
-- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
-- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
-  reference)
-- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
-- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
-  samples, 3 -> 8 samples)
-- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
-  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
-  is 3
-- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
-  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
-- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
-  the fractional part) recommended is 7
-- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
-  mA max, 1 -> 50 mA typical 80 mA max)
+- st,sample-time	: ADC conversion time in number of clock.
+				0 -> 36 clocks		4 -> 80 clocks (recommended)
+				1 -> 44 clocks		5 -> 96 clocks
+				2 -> 56 clocks		6 -> 144 clocks
+				3 -> 64 clocks
+- st,mod-12b		: ADC Bit mode
+				0 -> 10bit ADC		1 -> 12bit ADC
+- st,ref-sel		: ADC reference source
+				0 -> internal		1 -> external
+- st,adc-freq		: ADC Clock speed
+				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
+				1 -> 3.25 MHz
+- st,ave-ctrl		: Sample average control
+				0 -> 1 sample
+				1 -> 2 samples
+				2 -> 4 samples
+				3 -> 8 samples
+- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
+				0 -> 10 us		5 -> 5 ms
+				1 -> 50 us		6 -> 10 ms
+				2 -> 100 us		7 -> 50 ms
+				3 -> 500 us
+				4 -> 1 ms
+- st,settling		: Panel driver settling time (recommended is 2)
+				0 -> 10 us		5 -> 10 ms
+				1 -> 100 us		6 for 50 ms
+				2 -> 500 us		7 -> 100 ms
+				3 -> 1 ms
+				4 -> 5 ms
+- st,fraction-z		: Length of the fractional part in z (recommended is 7)
+			  (fraction-z ([0..7]) = Count of the fractional part)
+- st,i-drive		: current limit value of the touchscreen drivers
+				0 -> 20 mA (typical 35mA max)
+				1 -> 50 mA (typical 80 mA max)
 
 Node name must be stmpe_touchscreen and should be child node of stmpe node to
 which it belongs.
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index c797c05cd3c2..a46e7177195d 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -4,15 +4,15 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
 keypad, touchscreen, adc, pwm, rotator.
 
 Required properties:
- - compatible                   : "st,stmpe[610|801|811|1600|1601|2401|2403]"
- - reg                          : I2C/SPI address of the device
+ - compatible			: "st,stmpe[610|801|811|1600|1601|2401|2403]"
+ - reg				: I2C/SPI address of the device
 
 Optional properties:
- - interrupts                   : The interrupt outputs from the controller
- - interrupt-controller         : Marks the device node as an interrupt controller
- - wakeup-source                : Marks the input device as wakable
- - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- - irq-gpio                     : If present, which GPIO to use for event IRQ
+ - interrupts			: The interrupt outputs from the controller
+ - interrupt-controller		: Marks the device node as an interrupt controller
+ - wakeup-source		: Marks the input device as wakable
+ - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio			: If present, which GPIO to use for event IRQ
 
 Example:
 
-- 
2.19.2

[PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings

[Philippe Schenker]

From: Stefan Agner <stefan@agner.ch>

This adds the devicetree bindings for the STMPE ADC. And corrects a
typo in st,sample-time it is rather "6 -> 124 clocks" according
to the datasheet and not 144.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v4:
 - Put reformatting in a separate precursor patch.

Changes in v3:
 - Reformatted documentation for touchscreen to use tabs and have a better
   overview of the settings.
 - Added note which adc-settings will take precedence.
 - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated
   in the datasheet.

Changes in v2:
 - Moved the bindings for ADC to the overlying mfd.
 - Reformatted for better readability

 .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 ++++++++++++
 .../bindings/input/touchscreen/stmpe.txt      | 32 +++++++++----------
 .../devicetree/bindings/mfd/stmpe.txt         | 14 ++++++++
 3 files changed, 51 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
new file mode 100644
index 000000000000..480e66422625
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
@@ -0,0 +1,21 @@
+STMPE ADC driver
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-adc"
+
+Optional properties:
+Note that the ADC is shared with the STMPE touchscreen. ADC related settings
+have to be done in the mfd.
+- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
+  requestable due to different usage (e.g. touch)
+
+Node name must be stmpe_adc and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_adc {
+		compatible = "st,stmpe-adc";
+		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index 1d3f84308142..8e2b240882fa 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -5,18 +5,6 @@ Required properties:
  - compatible: "st,stmpe-ts"
 
 Optional properties:
-- st,sample-time	: ADC conversion time in number of clock.
-				0 -> 36 clocks		4 -> 80 clocks (recommended)
-				1 -> 44 clocks		5 -> 96 clocks
-				2 -> 56 clocks		6 -> 144 clocks
-				3 -> 64 clocks
-- st,mod-12b		: ADC Bit mode
-				0 -> 10bit ADC		1 -> 12bit ADC
-- st,ref-sel		: ADC reference source
-				0 -> internal		1 -> external
-- st,adc-freq		: ADC Clock speed
-				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
-				1 -> 3.25 MHz
 - st,ave-ctrl		: Sample average control
 				0 -> 1 sample
 				1 -> 2 samples
@@ -40,17 +28,29 @@ Optional properties:
 				0 -> 20 mA (typical 35mA max)
 				1 -> 50 mA (typical 80 mA max)
 
+Optional properties common with MFD (deprecated):
+ - st,sample-time	: ADC conversion time in number of clock.
+				0 -> 36 clocks		4 -> 80 clocks (recommended)
+				1 -> 44 clocks		5 -> 96 clocks
+				2 -> 56 clocks		6 -> 124 clocks
+				3 -> 64 clocks
+ - st,mod-12b		: ADC Bit mode
+				0 -> 10bit ADC		1 -> 12bit ADC
+ - st,ref-sel		: ADC reference source
+				0 -> internal		1 -> external
+ - st,adc-freq		: ADC Clock speed
+				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
+				1 -> 3.25 MHz
+
 Node name must be stmpe_touchscreen and should be child node of stmpe node to
 which it belongs.
 
+Note that common ADC settings of stmpe_touchscreen will take precedence.
+
 Example:
 
 	stmpe_touchscreen {
 		compatible = "st,stmpe-ts";
-		st,sample-time = <4>;
-		st,mod-12b = <1>;
-		st,ref-sel = <0>;
-		st,adc-freq = <1>;
 		st,ave-ctrl = <1>;
 		st,touch-det-delay = <2>;
 		st,settling = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index a46e7177195d..d4408a417193 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -14,6 +14,20 @@ Optional properties:
  - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
  - irq-gpio			: If present, which GPIO to use for event IRQ
 
+Optional properties for devices with touch and ADC (STMPE811|STMPE610):
+ - st,sample-time		: ADC conversion time in number of clock.
+					0 -> 36 clocks		4 -> 80 clocks (recommended)
+					1 -> 44 clocks		5 -> 96 clocks
+					2 -> 56 clocks		6 -> 124 clocks
+					3 -> 64 clocks
+ - st,mod-12b			: ADC Bit mode
+					0 -> 10bit ADC		1 -> 12bit ADC
+ - st,ref-sel			: ADC reference source
+					0 -> internal		1 -> external
+ - st,adc-freq			: ADC Clock speed
+					0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
+					1 -> 3.25 MHz
+
 Example:
 
 	stmpe1601: stmpe1601@40 {
-- 
2.19.2

[PATCH v4 7/8] ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker@toradex.com>

Add the stmpe-adc DT node as found on Toradex iMX6 modules

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v4:
 - Moved T30 devicetree settings to separate commit

Changes in v3:
 - None

Changes in v2:
 - Put common ADC settings in mfd

 arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
 2 files changed, 29 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 3dc99dd8dde1..8db476d8978d 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -331,11 +331,18 @@
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -345,17 +352,16 @@
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 87e15e7cb32b..2e303d79c7f8 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,11 +262,18 @@
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -276,17 +283,17 @@
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* 3.25 MHz ADC clock speed */
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
-- 
2.19.2

[PATCH v4 8/8] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules

[Philippe Schenker]

Add the stmpe-adc DT node as found on Toradex T30 modules

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v4:
 - New separate commit to hold T30 devicetree changes

Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
 2 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..850b0d13549a 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,18 @@
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -990,17 +997,16 @@
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..1f9198bb24ff 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,18 @@
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -859,17 +866,16 @@
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
-- 
2.19.2

Re: [PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings

[Jonathan Cameron]

On Wed, 12 Dec 2018 14:06:47 +0100
Philippe Schenker <dev@pschenker.ch> wrote:

> From: Stefan Agner <stefan@agner.ch>
> 
> This adds the devicetree bindings for the STMPE ADC. And corrects a
> typo in st,sample-time it is rather "6 -> 124 clocks" according
> to the datasheet and not 144.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

This still conflates a couple of different things but we can argue
about patch separation for ever so never mind.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> 
> Changes in v4:
>  - Put reformatting in a separate precursor patch.
> 
> Changes in v3:
>  - Reformatted documentation for touchscreen to use tabs and have a better
>    overview of the settings.
>  - Added note which adc-settings will take precedence.
>  - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated
>    in the datasheet.
> 
> Changes in v2:
>  - Moved the bindings for ADC to the overlying mfd.
>  - Reformatted for better readability
> 
>  .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 ++++++++++++
>  .../bindings/input/touchscreen/stmpe.txt      | 32 +++++++++----------
>  .../devicetree/bindings/mfd/stmpe.txt         | 14 ++++++++
>  3 files changed, 51 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> new file mode 100644
> index 000000000000..480e66422625
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> @@ -0,0 +1,21 @@
> +STMPE ADC driver
> +----------------
> +
> +Required properties:
> + - compatible: "st,stmpe-adc"
> +
> +Optional properties:
> +Note that the ADC is shared with the STMPE touchscreen. ADC related settings
> +have to be done in the mfd.
> +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
> +  requestable due to different usage (e.g. touch)
> +
> +Node name must be stmpe_adc and should be child node of stmpe node to
> +which it belongs.
> +
> +Example:
> +
> +	stmpe_adc {
> +		compatible = "st,stmpe-adc";
> +		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
> +	};
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> index 1d3f84308142..8e2b240882fa 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> @@ -5,18 +5,6 @@ Required properties:
>   - compatible: "st,stmpe-ts"
>  
>  Optional properties:
> -- st,sample-time	: ADC conversion time in number of clock.
> -				0 -> 36 clocks		4 -> 80 clocks (recommended)
> -				1 -> 44 clocks		5 -> 96 clocks
> -				2 -> 56 clocks		6 -> 144 clocks
> -				3 -> 64 clocks
> -- st,mod-12b		: ADC Bit mode
> -				0 -> 10bit ADC		1 -> 12bit ADC
> -- st,ref-sel		: ADC reference source
> -				0 -> internal		1 -> external
> -- st,adc-freq		: ADC Clock speed
> -				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> -				1 -> 3.25 MHz
>  - st,ave-ctrl		: Sample average control
>  				0 -> 1 sample
>  				1 -> 2 samples
> @@ -40,17 +28,29 @@ Optional properties:
>  				0 -> 20 mA (typical 35mA max)
>  				1 -> 50 mA (typical 80 mA max)
>  
> +Optional properties common with MFD (deprecated):
> + - st,sample-time	: ADC conversion time in number of clock.
> +				0 -> 36 clocks		4 -> 80 clocks (recommended)
> +				1 -> 44 clocks		5 -> 96 clocks
> +				2 -> 56 clocks		6 -> 124 clocks
> +				3 -> 64 clocks
> + - st,mod-12b		: ADC Bit mode
> +				0 -> 10bit ADC		1 -> 12bit ADC
> + - st,ref-sel		: ADC reference source
> +				0 -> internal		1 -> external
> + - st,adc-freq		: ADC Clock speed
> +				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> +				1 -> 3.25 MHz
> +
>  Node name must be stmpe_touchscreen and should be child node of stmpe node to
>  which it belongs.
>  
> +Note that common ADC settings of stmpe_touchscreen will take precedence.
> +
>  Example:
>  
>  	stmpe_touchscreen {
>  		compatible = "st,stmpe-ts";
> -		st,sample-time = <4>;
> -		st,mod-12b = <1>;
> -		st,ref-sel = <0>;
> -		st,adc-freq = <1>;
>  		st,ave-ctrl = <1>;
>  		st,touch-det-delay = <2>;
>  		st,settling = <2>;
> diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
> index a46e7177195d..d4408a417193 100644
> --- a/Documentation/devicetree/bindings/mfd/stmpe.txt
> +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
> @@ -14,6 +14,20 @@ Optional properties:
>   - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
>   - irq-gpio			: If present, which GPIO to use for event IRQ
>  
> +Optional properties for devices with touch and ADC (STMPE811|STMPE610):
> + - st,sample-time		: ADC conversion time in number of clock.
> +					0 -> 36 clocks		4 -> 80 clocks (recommended)
> +					1 -> 44 clocks		5 -> 96 clocks
> +					2 -> 56 clocks		6 -> 124 clocks
> +					3 -> 64 clocks
> + - st,mod-12b			: ADC Bit mode
> +					0 -> 10bit ADC		1 -> 12bit ADC
> + - st,ref-sel			: ADC reference source
> +					0 -> internal		1 -> external
> + - st,adc-freq			: ADC Clock speed
> +					0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> +					1 -> 3.25 MHz
> +
>  Example:
>  
>  	stmpe1601: stmpe1601@40 {

Re: [PATCH v4 1/8] dt-bindings: stmpe: reformatting parameter list and use tabs only

[Rob Herring]

On Wed, Dec 12, 2018 at 02:06:42PM +0100, Philippe Schenker wrote:
> This patch reformats the parameter list for stmpe device in a
> table-style so it is more clear to read.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Need to fix the author and S-o-b emails to match.

> ---
> 
> Changes in v4:
>  - New separate precursor patch for holding reformatting
> 
> Changes in v3: None
> Changes in v2: None
> 
>  .../bindings/input/touchscreen/stmpe.txt      | 52 ++++++++++++-------
>  .../devicetree/bindings/mfd/stmpe.txt         | 14 ++---
>  2 files changed, 41 insertions(+), 25 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> index 127baa31a77a..1d3f84308142 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> @@ -5,24 +5,40 @@ Required properties:
>   - compatible: "st,stmpe-ts"
>  
>  Optional properties:
> -- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
> -  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
> -  -> 144 clocks), recommended is 4.
> -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
> -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
> -  reference)
> -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
> -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
> -  samples, 3 -> 8 samples)
> -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
> -  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
> -  is 3
> -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
> -  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
> -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
> -  the fractional part) recommended is 7
> -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
> -  mA max, 1 -> 50 mA typical 80 mA max)
> +- st,sample-time	: ADC conversion time in number of clock.
> +				0 -> 36 clocks		4 -> 80 clocks (recommended)
> +				1 -> 44 clocks		5 -> 96 clocks
> +				2 -> 56 clocks		6 -> 144 clocks
> +				3 -> 64 clocks

Just make this a 1 column list

> +- st,mod-12b		: ADC Bit mode
> +				0 -> 10bit ADC		1 -> 12bit ADC
> +- st,ref-sel		: ADC reference source
> +				0 -> internal		1 -> external
> +- st,adc-freq		: ADC Clock speed
> +				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> +				1 -> 3.25 MHz
> +- st,ave-ctrl		: Sample average control
> +				0 -> 1 sample
> +				1 -> 2 samples
> +				2 -> 4 samples
> +				3 -> 8 samples
> +- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
> +				0 -> 10 us		5 -> 5 ms
> +				1 -> 50 us		6 -> 10 ms
> +				2 -> 100 us		7 -> 50 ms
> +				3 -> 500 us
> +				4 -> 1 ms
> +- st,settling		: Panel driver settling time (recommended is 2)
> +				0 -> 10 us		5 -> 10 ms
> +				1 -> 100 us		6 for 50 ms
> +				2 -> 500 us		7 -> 100 ms
> +				3 -> 1 ms
> +				4 -> 5 ms
> +- st,fraction-z		: Length of the fractional part in z (recommended is 7)
> +			  (fraction-z ([0..7]) = Count of the fractional part)
> +- st,i-drive		: current limit value of the touchscreen drivers
> +				0 -> 20 mA (typical 35mA max)
> +				1 -> 50 mA (typical 80 mA max)
>  
>  Node name must be stmpe_touchscreen and should be child node of stmpe node to
>  which it belongs.
> diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
> index c797c05cd3c2..a46e7177195d 100644
> --- a/Documentation/devicetree/bindings/mfd/stmpe.txt
> +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
> @@ -4,15 +4,15 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
>  keypad, touchscreen, adc, pwm, rotator.
>  
>  Required properties:
> - - compatible                   : "st,stmpe[610|801|811|1600|1601|2401|2403]"
> - - reg                          : I2C/SPI address of the device
> + - compatible			: "st,stmpe[610|801|811|1600|1601|2401|2403]"
> + - reg				: I2C/SPI address of the device
>  
>  Optional properties:
> - - interrupts                   : The interrupt outputs from the controller
> - - interrupt-controller         : Marks the device node as an interrupt controller
> - - wakeup-source                : Marks the input device as wakable
> - - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
> - - irq-gpio                     : If present, which GPIO to use for event IRQ
> + - interrupts			: The interrupt outputs from the controller
> + - interrupt-controller		: Marks the device node as an interrupt controller
> + - wakeup-source		: Marks the input device as wakable
> + - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
> + - irq-gpio			: If present, which GPIO to use for event IRQ
>  
>  Example:
>  
> -- 
> 2.19.2
> 

Re: [PATCH v4 6/8] iio: adc: add STMPE ADC devicetree bindings

[Rob Herring]

On Wed, Dec 12, 2018 at 02:06:47PM +0100, Philippe Schenker wrote:
> From: Stefan Agner <stefan@agner.ch>
> 
> This adds the devicetree bindings for the STMPE ADC. And corrects a
> typo in st,sample-time it is rather "6 -> 124 clocks" according
> to the datasheet and not 144.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v4:
>  - Put reformatting in a separate precursor patch.
> 
> Changes in v3:
>  - Reformatted documentation for touchscreen to use tabs and have a better
>    overview of the settings.
>  - Added note which adc-settings will take precedence.
>  - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated
>    in the datasheet.
> 
> Changes in v2:
>  - Moved the bindings for ADC to the overlying mfd.
>  - Reformatted for better readability
> 
>  .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 ++++++++++++
>  .../bindings/input/touchscreen/stmpe.txt      | 32 +++++++++----------
>  .../devicetree/bindings/mfd/stmpe.txt         | 14 ++++++++
>  3 files changed, 51 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> new file mode 100644
> index 000000000000..480e66422625
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> @@ -0,0 +1,21 @@
> +STMPE ADC driver
> +----------------
> +
> +Required properties:
> + - compatible: "st,stmpe-adc"
> +
> +Optional properties:
> +Note that the ADC is shared with the STMPE touchscreen. ADC related settings
> +have to be done in the mfd.
> +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
> +  requestable due to different usage (e.g. touch)
> +
> +Node name must be stmpe_adc and should be child node of stmpe node to
> +which it belongs.
> +
> +Example:
> +
> +	stmpe_adc {
> +		compatible = "st,stmpe-adc";
> +		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
> +	};
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> index 1d3f84308142..8e2b240882fa 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
> @@ -5,18 +5,6 @@ Required properties:
>   - compatible: "st,stmpe-ts"
>  
>  Optional properties:
> -- st,sample-time	: ADC conversion time in number of clock.
> -				0 -> 36 clocks		4 -> 80 clocks (recommended)
> -				1 -> 44 clocks		5 -> 96 clocks
> -				2 -> 56 clocks		6 -> 144 clocks
> -				3 -> 64 clocks
> -- st,mod-12b		: ADC Bit mode
> -				0 -> 10bit ADC		1 -> 12bit ADC
> -- st,ref-sel		: ADC reference source
> -				0 -> internal		1 -> external
> -- st,adc-freq		: ADC Clock speed
> -				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> -				1 -> 3.25 MHz
>  - st,ave-ctrl		: Sample average control
>  				0 -> 1 sample
>  				1 -> 2 samples
> @@ -40,17 +28,29 @@ Optional properties:
>  				0 -> 20 mA (typical 35mA max)
>  				1 -> 50 mA (typical 80 mA max)
>  
> +Optional properties common with MFD (deprecated):
> + - st,sample-time	: ADC conversion time in number of clock.
> +				0 -> 36 clocks		4 -> 80 clocks (recommended)
> +				1 -> 44 clocks		5 -> 96 clocks
> +				2 -> 56 clocks		6 -> 124 clocks
> +				3 -> 64 clocks
> + - st,mod-12b		: ADC Bit mode
> +				0 -> 10bit ADC		1 -> 12bit ADC
> + - st,ref-sel		: ADC reference source
> +				0 -> internal		1 -> external
> + - st,adc-freq		: ADC Clock speed
> +				0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> +				1 -> 3.25 MHz
> +
>  Node name must be stmpe_touchscreen and should be child node of stmpe node to
>  which it belongs.
>  
> +Note that common ADC settings of stmpe_touchscreen will take precedence.

This isn't clear. The parent or child properties take precedence?

> +
>  Example:
>  
>  	stmpe_touchscreen {
>  		compatible = "st,stmpe-ts";
> -		st,sample-time = <4>;
> -		st,mod-12b = <1>;
> -		st,ref-sel = <0>;
> -		st,adc-freq = <1>;

It would be nice to see an example with both ADC and touchscreen.

>  		st,ave-ctrl = <1>;
>  		st,touch-det-delay = <2>;
>  		st,settling = <2>;
> diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
> index a46e7177195d..d4408a417193 100644
> --- a/Documentation/devicetree/bindings/mfd/stmpe.txt
> +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
> @@ -14,6 +14,20 @@ Optional properties:
>   - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
>   - irq-gpio			: If present, which GPIO to use for event IRQ
>  
> +Optional properties for devices with touch and ADC (STMPE811|STMPE610):
> + - st,sample-time		: ADC conversion time in number of clock.
> +					0 -> 36 clocks		4 -> 80 clocks (recommended)
> +					1 -> 44 clocks		5 -> 96 clocks
> +					2 -> 56 clocks		6 -> 124 clocks
> +					3 -> 64 clocks
> + - st,mod-12b			: ADC Bit mode
> +					0 -> 10bit ADC		1 -> 12bit ADC
> + - st,ref-sel			: ADC reference source
> +					0 -> internal		1 -> external
> + - st,adc-freq			: ADC Clock speed
> +					0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
> +					1 -> 3.25 MHz
> +
>  Example:
>  
>  	stmpe1601: stmpe1601@40 {
> -- 
> 2.19.2
> 

Re: [PATCH v4 8/8] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules

[Dmitry Osipenko]

Hello Philippe,

Please CC all the patches in the series to every recipient.

On 12.12.2018 16:06, Philippe Schenker wrote:
> Add the stmpe-adc DT node as found on Toradex T30 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v4:
>  - New separate commit to hold T30 devicetree changes
> 
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
>  2 files changed, 28 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..850b0d13549a 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -976,11 +976,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -990,17 +997,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;

Does this change depend on some other patch in the series? Is this a backwards-compatible change? Please explain.

>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..1f9198bb24ff 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -845,11 +845,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -859,17 +866,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> 

Re: [PATCH v4 1/8] dt-bindings: stmpe: reformatting parameter list and use tabs only

[Lee Jones]

On Wed, 12 Dec 2018, Philippe Schenker wrote:

> This patch reformats the parameter list for stmpe device in a
> table-style so it is more clear to read.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v4:
>  - New separate precursor patch for holding reformatting
> 
> Changes in v3: None
> Changes in v2: None
> 
>  .../bindings/input/touchscreen/stmpe.txt      | 52 ++++++++++++-------
>  .../devicetree/bindings/mfd/stmpe.txt         | 14 ++---
>  2 files changed, 41 insertions(+), 25 deletions(-)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v4 1/8] dt-bindings: stmpe: reformatting parameter list and use tabs only

[Lee Jones]

On Wed, 12 Dec 2018, Philippe Schenker wrote:

> This patch reformats the parameter list for stmpe device in a
> table-style so it is more clear to read.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v4:
>  - New separate precursor patch for holding reformatting
> 
> Changes in v3: None
> Changes in v2: None
> 
>  .../bindings/input/touchscreen/stmpe.txt      | 52 ++++++++++++-------
>  .../devicetree/bindings/mfd/stmpe.txt         | 14 ++---
>  2 files changed, 41 insertions(+), 25 deletions(-)

Set looks okay.

Please submit a [RESEND] with all the Acks you've collected.

And next time, please make sure you author a 0th (cover-letter) patch.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog