From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH v3 03/15] dt-bindings: net: broadcom-bluetooth: Add BCM20702A1 compatible string Date: Mon, 17 Dec 2018 12:04:37 +0800 Message-ID: <20181217040449.31437-4-wens@csie.org> References: <20181217040449.31437-1-wens@csie.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181217040449.31437-1-wens@csie.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Marcel Holtmann , Johan Hedberg , Rob Herring , Mark Rutland , Maxime Ripard Cc: Ondrej Jirman , devicetree@vger.kernel.org, Rob Herring , linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, Chen-Yu Tsai , Loic Poulain , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The BCM20702A1 is a Bluetooth 4.0 chip from Broadcom. It is found in the Ampak AP6210 WiFi+BT module, identified from the read verbose config info command response. However the Bluetooth firmware provided by vendors uses the name BCM20710. This patch elects to use the chip ID returned by the chip for the compatible string. Reviewed-by: Rob Herring Tested-by: Ondrej Jirman Signed-off-by: Chen-Yu Tsai --- Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index 78cfa0fbece9..d9d734a07faf 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -10,6 +10,7 @@ device the slave device is attached to. Required properties: - compatible: should contain one of the following: + * "brcm,bcm20702a1" * "brcm,bcm43438-bt" Optional properties: -- 2.20.0