From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lorenzo Pieralisi Subject: Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629 Date: Mon, 17 Dec 2018 15:46:45 +0000 Message-ID: <20181217154645.GA24864@e107981-ln.cambridge.arm.com> References: <1544058553-10936-1-git-send-email-jianjun.wang@mediatek.com> <1544058553-10936-3-git-send-email-jianjun.wang@mediatek.com> <20181213145517.GB4701@google.com> <1545034779.8528.8.camel@mhfsdcap03> <20181217143247.GK20725@google.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20181217143247.GK20725@google.com> Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Helgaas Cc: Jianjun Wang , ryder.lee@mediatek.com, robh+dt@kernel.org, matthias.bgg@gmail.com, linux-pci@vger.kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, youlin.pei@mediatek.com, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, honghui.zhang@mediatek.com, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Mon, Dec 17, 2018 at 08:32:47AM -0600, Bjorn Helgaas wrote: > On Mon, Dec 17, 2018 at 04:19:39PM +0800, Jianjun Wang wrote: > > On Thu, 2018-12-13 at 08:55 -0600, Bjorn Helgaas wrote: > > > On Thu, Dec 06, 2018 at 09:09:13AM +0800, Jianjun Wang wrote: > > > > The read value of BAR0 is 0xffff_ffff, it's size will be calculated as 4GB > > > > in arm64 but bogus alignment values at arm32, the pcie device and devices > > > > behind this bridge will not be enabled. Fix it's BAR0 resource size to > > > > guarantee the pcie devices will be enabled correctly. > > > > > > So this is a hardware erratum? Per spec, a memory BAR has bit 0 hardwired > > > to 0, and an IO BAR has bit 1 hardwired to 0. > > > > Yes, it only works properly on 64bit platform. > > I don't understand. BARs are supposed to work the same regardless of > whether it's a 32- or 64-bit platform. If this is a workaround for a > hardware defect, please just say that explicitly. I do not understand this either. First thing to do is to describe the problem properly so that we can actually find a solution to it. Lorenzo