Re: [PATCH v4 3/6] media: sun6i: Update default CSI_SCLK for A64

[Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1507 bytes --]

On Tue, Dec 18, 2018 at 05:03:17PM +0530, Jagan Teki wrote:
> Unfortunately A64 CSI cannot work with default CSI_SCLK rate.
> 
> A64 BSP is using 300MHz clock rate as default csi clock,
> so sun6i_csi require explicit change to update CSI_SCLK
> rate to 300MHZ for A64 SoC's.
> 
> So, set the clk_mod to 300MHz only for A64.
> 
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> ---
>  drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> index 9ff61896e4bb..91470edf7581 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> @@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev,
>  		return PTR_ERR(sdev->clk_mod);
>  	}
>  
> +	/* A64 require 300MHz mod clock to operate properly */
> +	if (of_device_is_compatible(pdev->dev.of_node,
> +				    "allwinner,sun50i-a64-csi"))
> +		clk_set_rate_exclusive(sdev->clk_mod, 300000000);
> +

If you're using clk_set_rate_exclusive, you need to put back the
"exclusive" reference once you're not using the clock.

Doing it here is not really optimal either, since you'll put a
constraint on the system (maintaining that clock at 300MHz), while
it's not in use.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com