From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [RFC v2 1/2] pwm: sifive: Add DT documentation for SiFive PWM Controller Date: Tue, 18 Dec 2018 11:20:31 -0600 Message-ID: <20181218172031.GA7272@bogus> References: <1544768442-12530-1-git-send-email-yash.shah@sifive.com> <1544768442-12530-2-git-send-email-yash.shah@sifive.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1544768442-12530-2-git-send-email-yash.shah@sifive.com> Sender: linux-kernel-owner@vger.kernel.org To: Yash Shah Cc: palmer@sifive.com, linux-pwm@vger.kernel.org, linux-riscv@lists.infradead.org, thierry.reding@gmail.com, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, sachin.ghadi@sifive.com, paul.walmsley@sifive.com List-Id: devicetree@vger.kernel.org On Fri, Dec 14, 2018 at 11:50:41AM +0530, Yash Shah wrote: > DT documentation for PWM controller added with updated compatible > string. > > Signed-off-by: Wesley W. Terpstra > [Atish: Compatible string update] > Signed-off-by: Atish Patra > Signed-off-by: Yash Shah > --- > .../devicetree/bindings/pwm/pwm-sifive.txt | 44 ++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt > new file mode 100644 > index 0000000..250d8ee > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt > @@ -0,0 +1,44 @@ > +SiFive PWM controller > + > +Unlike most other PWM controllers, the SiFive PWM controller currently only > +supports one period for all channels in the PWM. This is set globally in DTS. > +The period also has significant restrictions on the values it can achieve, > +which the driver rounds to the nearest achievable frequency. > + > +Required properties: > +- compatible: should be something similar to "sifive,-pwm" for > + the PWM as integrated on a particular chip, and > + "sifive,pwm" for the general PWM IP block > + programming model. Supported compatible strings are: > + "sifive,fu540-c000-pwm" for the SiFive PWM v0 as > + integrated onto the SiFive FU540 chip, and "sifive,pwm0" > + for the SiFive PWM v0 IP block with no chip integration > + tweaks. This should reference the common doc Paul has written and not re-explain the versioning scheme again. > +- reg: physical base address and length of the controller's registers > +- clocks: The frequency the controller runs at > +- #pwm-cells: Should be 2. > + The first cell is the PWM channel number > + The second cell is the PWM polarity > +- sifive,approx-period: the driver will get as close to this period as it can Needs a unit suffix as defined in property-units.txt > +- interrupts: one interrupt per PWM channel > + > +PWM RTL that corresponds to the IP block version numbers can be found > +here: > + > +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm > + > +Further information on the format of the IP > +block-specific version numbers can be found in > +Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt > + > +Examples: > + > +pwm: pwm@10020000 { > + compatible = "sifive,fu540-c000-pwm","sifive,pwm0"; > + reg = <0x0 0x10020000 0x0 0x1000>; > + clocks = <&tlclk>; > + interrupt-parent = <&plic>; > + interrupts = <42 43 44 45>; > + #pwm-cells = <2>; > + sifive,approx-period = <1000000>; > +}; > -- > 1.9.1 >