Re: [PATCH v2 2/7] dt-bindings: remoteproc: qcom: Add clock bindings for Q6V5

[Rob Herring <robh@kernel.org>]

On Mon, Dec 17, 2018 at 03:37:19PM +0530, Sibi Sankar wrote:
> Add missing clock bindings for Q6V5 MSS on SDM845 SoCs.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,q6v5.txt       | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 9ff5b0309417..780adc043b37 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -39,13 +39,17 @@ on the Qualcomm Hexagon core.
>  - clocks:
>  	Usage: required
>  	Value type: <phandle>
> -	Definition: reference to the iface, bus and mem clocks to be held on
> -		    behalf of the booting of the Hexagon core
> +	Definition: reference to the list of 4 clocks for the modem sub-system
> +		    reference to the list of 8 clocks for the modem sub-system
> +		    on SDM845 SoCs
>  
>  - clock-names:
>  	Usage: required
>  	Value type: <stringlist>
> -	Definition: must be "iface", "bus", "mem"
> +	Definition: must be "iface", "bus", "mem", "xo" for the modem sub-system
> +		    must be "iface", "bus", "mem", "gpll0_mss", "snoc_axi",
> +		    "mnoc_axi", "prng", "xo" for the modem sub-system on SDM845
> +		    SoCs

This seems to me a list of all clocks you need enabled, not what clocks 
actually go to the modem. Specifically, shouldn't the *noc_axi clocks be 
managed by the interconnect driver?

Rob