Re: [PATCH v4 0/6] media/sun6i: Allwinner A64 CSI support

[Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2474 bytes --]

65;5402;1c
On Wed, Dec 19, 2018 at 04:11:50PM +0530, Jagan Teki wrote:
> On Wed, Dec 19, 2018 at 3:55 PM Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org> wrote:
> >
> > On Tue, Dec 18, 2018 at 08:58:22PM +0530, Jagan Teki wrote:
> > > On Tue, Dec 18, 2018 at 8:51 PM Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org> wrote:
> > > >
> > > > On Tue, Dec 18, 2018 at 05:03:14PM +0530, Jagan Teki wrote:
> > > > > This series support CSI on Allwinner A64.
> > > > >
> > > > > Tested 640x480, 320x240, 720p, 1080p resolutions UYVY8_2X8 format.
> > > > >
> > > > > Changes for v4:
> > > > > - update the compatible string order
> > > > > - add proper commit message
> > > > > - included BPI-M64 patch
> > > > > - skipped amarula-a64 patch
> > > > > Changes for v3:
> > > > > - update dt-bindings for A64
> > > > > - set mod clock via csi driver
> > > > > - remove assign clocks from dtsi
> > > > > - remove i2c-gpio opendrian
> > > > > - fix avdd and dovdd supplies
> > > > > - remove vcc-csi pin group supply
> > > > >
> > > > > Note: This series created on top of H3 changes [1]
> > > > >
> > > > > [1] https://patchwork.kernel.org/cover/10705905/
> > > >
> > > > You had memory corruption before, how was this fixed?
> > >
> > > Memory corruption observed with default 600MHz on 1080p. It worked
> > > fine on BPI-M64 (with 300MHz)
> >
> > I don't get it. In the previous version of those patches, you were
> > mentionning you were still having this issue, even though you had the
> > clock running at 300MHz, and then you tried to convince us to merge
> > the patches nonetheless.
> >
> > Why would you say that then if that issue was fixed?
> 
> Previous version has A64-Relic board, which has some xclk issue on
> sensor side wrt 1080p. I have tried 300MHz on the same hardware, it's
> failing to capture on 30fps and so I tried 600MHz(which is default) on
> the same configuration but it encounter memory corruption.
> 
> So, for checking whether there is an issue with hardware on A64-Relic
> I moved with BPI-M64 dev board. which is working 1080p with 300MHz, ie
> reason I have not included A64-Relic on this version and included
> BPI-M64. We processed A64-Relic to hardware team to figure out the
> clock and once ie fixed I'm planning to send DTS patch for that.
> 
> This is overall summary, hope you understand.

Ok, great, thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com