From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kalle Valo Subject: Re: [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example Date: Thu, 20 Dec 2018 17:10:50 +0000 (UTC) Message-ID: <20181220171050.27DC0602CB@smtp.codeaurora.org> References: <1544544804-4039-2-git-send-email-bperumal@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1544544804-4039-2-git-send-email-bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Bhagavathi Perumal S List-Id: devicetree@vger.kernel.org Bhagavathi Perumal S wrote: > In qcom,ath10k documentation, ath10k is used as node name in the example of > pci based device. Normally, node name should be class of device and not the > model name, so fix it to node name "wifi". And remove the property device_type > pci since only pci bridges should have this property. > > Signed-off-by: Bhagavathi Perumal S > Reviewed-by: Rob Herring > Signed-off-by: Kalle Valo 3 patches applied to ath-next branch of ath.git, thanks. e5404969a335 dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example f3f587995c5a dt-bindings: net: ath10k: add new dt entry to identify external FEM 84758d4d43e9 ath10k: add support to configure BB timing over wmi -- https://patchwork.kernel.org/patch/10724123/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches