From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Shiyan Subject: [PATCH 2/4] ARM: dts: clps711x: rename uart device tree nodes Date: Fri, 21 Dec 2018 13:30:17 +0300 Message-ID: <20181221103019.15374-2-shc_work@mail.ru> References: <20181221103019.15374-1-shc_work@mail.ru> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181221103019.15374-1-shc_work@mail.ru> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland , devicetree@vger.kernel.org, Rob Herring , Alexander Shiyan , Arnd Bergmann List-Id: devicetree@vger.kernel.org Use generic names 'serial' for UARTs. Signed-off-by: Alexander Shiyan --- arch/arm/boot/dts/ep7209.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi index bcaf54221145..48a1660a9cf2 100644 --- a/arch/arm/boot/dts/ep7209.dtsi +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -22,8 +22,8 @@ gpio1 = &portb; gpio3 = &portd; gpio4 = &porte; - serial0 = &uart1; - serial1 = &uart2; + serial0 = &serial1; + serial1 = &serial2; spi0 = &spi; timer0 = &timer1; timer1 = &timer2; @@ -143,7 +143,7 @@ #pwm-cells = <1>; }; - uart1: uart@80000480 { + serial1: serial@80000480 { compatible = "cirrus,ep7209-uart"; reg = <0x80000480 0x80>; interrupts = <12 13>; @@ -166,7 +166,7 @@ reg = <0x80001100 0x80>; }; - uart2: uart@80001480 { + serial2: serial@80001480 { compatible = "cirrus,ep7209-uart"; reg = <0x80001480 0x80>; interrupts = <28 29>; -- 2.13.0