From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Kemnade Subject: [PATCH 2/2] devicetree: hwmon: Add bindings documentation for HIH6130 Date: Thu, 27 Dec 2018 16:13:49 +0100 Message-ID: <20181227151349.29753-3-andreas@kemnade.info> References: <20181227151349.29753-1-andreas@kemnade.info> Return-path: In-Reply-To: <20181227151349.29753-1-andreas@kemnade.info> Sender: linux-kernel-owner@vger.kernel.org To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, mark.rutland@arm.com, linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Andreas Kemnade List-Id: devicetree@vger.kernel.org Add bindings documentation for HIH6130 driver. Signed-off-by: Andreas Kemnade --- Documentation/devicetree/bindings/hwmon/hih6130.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/hih6130.txt diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt new file mode 100644 index 000000000000..2c43837af4c2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/hih6130.txt @@ -0,0 +1,12 @@ +Honeywell Humidicon HIH-6130 humidity/temperature sensor +-------------------------------------------------------- + +Requires node properties: +- compatible : "honeywell,hi6130" +- reg : the I2C address of the device. This is 0x27. + +Example: + hih6130@27 { + compatible = "honeywell,hih6130"; + reg = <0x27>; + }; -- 2.11.0