Re: [PATCH V3] dt-bindings: timer: gpt: update binding doc

[Rob Herring <robh@kernel.org>]

On Wed, Dec 19, 2018 at 07:09:10AM +0000, Anson Huang wrote:
> The i.MX GPT timer driver binding doc is out of date,
> update it according to current GPT timer driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  .../devicetree/bindings/timer/fsl,imxgpt.txt       | 35 ++++++++++++++++++----
>  1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
> index 9809b11..a7f23a6 100644
> --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
> +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
> @@ -2,17 +2,40 @@ Freescale i.MX General Purpose Timer (GPT)
>  
>  Required properties:
>  
> -- compatible : should be "fsl,<soc>-gpt"
> -- reg : Specifies base physical address and size of the registers.
> -- interrupts : A list of 4 interrupts; one per timer channel.
> -- clocks : The clocks provided by the SoC to drive the timer.
> +- compatible : should be one of following:
> +
> +  should be "fsl,imx1-gpt" for i.MX1;
> +
> +  should be one of following for i.MX21/i.MX27:
> +  - "fsl,imx21-gpt",
> +  - "fsl,imx27-gpt",

What this says and your example still don't match. I think you want:

- "fsl,imx21-gpt"
- "fsl,imx27-gpt", "fsl,imx21-gpt"

> +
> +  should be one of following for i.MX31/i.MX25/i.MX50/i.MX51/i.MX53/i.MX6Q:
> +  - "fsl,imx31-gpt",
> +  - "fsl,imx25-gpt",
> +  - "fsl,imx50-gpt",
> +  - "fsl,imx51-gpt",
> +  - "fsl,imx53-gpt",
> +  - "fsl,imx6q-gpt",

I'm sure some of these are backwards compatible. 

> +
> +  should be one of following for i.MX6DL/i.MX6SL/i.MX6SX:
> +  - "fsl,imx6dl-gpt",
> +  - "fsl,imx6sl-gpt",
> +  - "fsl,imx6sx-gpt".
> +
> +- reg : specifies base physical address and size of the registers.
> +- interrupts : should be the gpt interrupt.
> +- clocks : the clocks provided by the SoC to drive the timer, must contain
> +           an entry for each entry in clock-names.
> +- clock-names : must include "ipg" entry first, then "per" entry.
>  
>  Example:
>  
>  gpt1: timer@10003000 {
> -	compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
> +	compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
>  	reg = <0x10003000 0x1000>;
>  	interrupts = <26>;
> -	clocks = <&clks 46>, <&clks 61>;
> +	clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
> +		 <&clks IMX27_CLK_PER1_GATE>;
>  	clock-names = "ipg", "per";
>  };
> -- 
> 2.7.4
>