From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Xie Subject: [PATCH v7 0/6] support a new type of PMIC,including two chips(rk817 and rk809) Date: Wed, 2 Jan 2019 05:19:56 -0500 Message-ID: <20190102102002.29245-1-tony.xie@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: heiko@sntech.de Cc: broonie@kernel.org, lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, a.zummo@towertech.it, alexandre.belloni@bootlin.com, sboyd@kernel.org, linux-clk@vger.kernel.org, linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, chenjh@rock-chips.com, xsf@rock-chips.com, zhangqing@rock-chips.com, huangtao@rock-chips.com, tony.xie@rock-chips.com List-Id: devicetree@vger.kernel.org Most of functions and registers of the rk817 and rk808 are the same, so they can share allmost all codes. Their specifications are as follows: 1) The RK809 and RK809 consist of 5 DCDCs, 9 LDOs and have the same registers for these components except dcdc5. 2) The dcdc5 is a boost dcdc for RK817 and is a buck for RK809. 3) The RK817 has one switch but The Rk809 has two. Changes in V2: 1. initialize the pm_pwroff_fn to NULL. 2. use EXPORT_SYMBOL_GPL to export pm_power_off_prepare. 3. change patch 2/3/4/5 subjects. Changes in V3 1. change patch 4 subjects 2. replace pr_ with dev_ for printing in patch 2 3. modify switch1 and switch2 configs in patch 2 4. explain gpio information for rk809 and rk817 in patch 4 Changes in V4: 1. modify some codes for patch 2 and patch 5 according to comments 2. add reviewer mail lists for patch 3 and 4 Changes in V5: modify some codes for patch 1 according to reveiw comments for v3. 1) remove the pm_power_off_prepare() and replace with shutdown call-back from syscore 2) move the macro REGMAP_IRQ_M into the regmap.h and rename it REGMAP_IRQ_LINE 3) make some dev_warn() log clear Changes in V6: modify some codes according to reveiw comments for v5. Changes in V7: modify some codes for patch 2 according to reveiw comments. Tony Xie (6): mfd: rk808: remove the id_table mfd: rk808: Add RK817 and RK809 support regulator: rk808: add RK809 and RK817 support. dt-bindings: mfd: rk808: Add binding information for RK809 and RK817. rtc: rk808: add RK809 and RK817 support. clk: RK808: add RK809 and RK817 support. .../devicetree/bindings/mfd/rk808.txt | 44 ++ drivers/clk/Kconfig | 9 +- drivers/clk/clk-rk808.c | 64 +- drivers/mfd/Kconfig | 6 +- drivers/mfd/rk808.c | 199 +++++- drivers/regulator/Kconfig | 4 +- drivers/regulator/rk808-regulator.c | 657 +++++++++++++++++- drivers/rtc/Kconfig | 4 +- drivers/rtc/rtc-rk808.c | 68 +- include/linux/mfd/rk808.h | 175 +++++ 10 files changed, 1164 insertions(+), 66 deletions(-) -- 2.17.1