From: Daniel Baluta <daniel.baluta@nxp.com>
To: "broonie@kernel.org" <broonie@kernel.org>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Cc: Cosmin Samoila <cosmin.samoila@nxp.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
Viorel Suman <viorel.suman@nxp.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"S.j. Wang" <shengjiu.wang@nxp.com>,
dl-linux-imx <linux-imx@nxp.com>,
"daniel.baluta@gmail.com" <daniel.baluta@gmail.com>
Subject: [PATCH 1/2] ASoC: ak4458: Add support for AK4497
Date: Fri, 4 Jan 2019 16:27:03 +0000 [thread overview]
Message-ID: <20190104162649.13103-2-daniel.baluta@nxp.com> (raw)
In-Reply-To: <20190104162649.13103-1-daniel.baluta@nxp.com>
AK4497 is a 32-bit 2ch DAC and has the same register
map as AK4458 with few exceptions:
* AK4497 has one more register at the end of register space
DFS_READ which is a read only register that allows users
to read FS Auto Detection mode. We currently do not use
this register so we use the same regmap structure as for ak4458.
* Because AK4458 is an 8ch DAC there are some fields that are
only used by AK4458 and marked as reserved for AK4497, so for
this reason we need to have a distinct set of controls, widgets
and routes.
Datasheet for AK4497 is at:
https://www.akm.com/akm/en/file/ev-board-manual/AK4497EQ.pdf
Datasheet for AK4458 is at:
https://www.akm.com/akm/en/file/datasheet/AK4458VN.pdf
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
sound/soc/codecs/ak4458.c | 79 +++++++++++++++++++++++++++++++++++++--
1 file changed, 76 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c
index 70d4c89bd6fc..eab7c76cfcd9 100644
--- a/sound/soc/codecs/ak4458.c
+++ b/sound/soc/codecs/ak4458.c
@@ -21,6 +21,11 @@
#include "ak4458.h"
+struct ak4458_drvdata {
+ struct snd_soc_dai_driver *dai_drv;
+ const struct snd_soc_component_driver *comp_drv;
+};
+
/* AK4458 Codec Private Data */
struct ak4458_priv {
struct device *dev;
@@ -258,6 +263,33 @@ static const struct snd_soc_dapm_route ak4458_intercon[] = {
{"AK4458 AOUTD", NULL, "AK4458 DAC4"},
};
+/* ak4497 controls */
+static const struct snd_kcontrol_new ak4497_snd_controls[] = {
+ SOC_DOUBLE_R_TLV("DAC Playback Volume", AK4458_03_LCHATT,
+ AK4458_04_RCHATT, 0, 0xFF, 0, dac_tlv),
+ SOC_ENUM("AK4497 De-emphasis Response DAC", ak4458_dac1_dem_enum),
+ SOC_ENUM_EXT("AK4497 Digital Filter Setting", ak4458_digfil_enum,
+ get_digfil, set_digfil),
+ SOC_ENUM("AK4497 Inverting Enable of DZFB", ak4458_dzfb_enum),
+ SOC_ENUM("AK4497 Sound Mode", ak4458_sm_enum),
+ SOC_ENUM("AK4497 Attenuation transition Time Setting",
+ ak4458_ats_enum),
+};
+
+/* ak4497 dapm widgets */
+static const struct snd_soc_dapm_widget ak4497_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("AK4497 DAC", NULL, AK4458_0A_CONTROL6, 2, 0),
+ SND_SOC_DAPM_AIF_IN("AK4497 SDTI", "Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_OUTPUT("AK4497 AOUT"),
+};
+
+/* ak4497 dapm routes */
+static const struct snd_soc_dapm_route ak4497_intercon[] = {
+ {"AK4497 DAC", NULL, "AK4497 SDTI"},
+ {"AK4497 AOUT", NULL, "AK4497 DAC"},
+
+};
+
static int ak4458_rstn_control(struct snd_soc_component *component, int bit)
{
int ret;
@@ -476,6 +508,18 @@ static struct snd_soc_dai_driver ak4458_dai = {
.ops = &ak4458_dai_ops,
};
+static struct snd_soc_dai_driver ak4497_dai = {
+ .name = "ak4497-aif",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = AK4458_FORMATS,
+ },
+ .ops = &ak4458_dai_ops,
+};
+
static void ak4458_power_off(struct ak4458_priv *ak4458)
{
if (ak4458->reset_gpiod) {
@@ -573,6 +617,21 @@ static const struct snd_soc_component_driver soc_codec_dev_ak4458 = {
.non_legacy_dai_naming = 1,
};
+static const struct snd_soc_component_driver soc_codec_dev_ak4497 = {
+ .probe = ak4458_probe,
+ .remove = ak4458_remove,
+ .controls = ak4497_snd_controls,
+ .num_controls = ARRAY_SIZE(ak4497_snd_controls),
+ .dapm_widgets = ak4497_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(ak4497_dapm_widgets),
+ .dapm_routes = ak4497_intercon,
+ .num_dapm_routes = ARRAY_SIZE(ak4497_intercon),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
static const struct regmap_config ak4458_regmap = {
.reg_bits = 8,
.val_bits = 8,
@@ -583,6 +642,16 @@ static const struct regmap_config ak4458_regmap = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct ak4458_drvdata ak4458_drvdata = {
+ .dai_drv = &ak4458_dai,
+ .comp_drv = &soc_codec_dev_ak4458,
+};
+
+static const struct ak4458_drvdata ak4497_drvdata = {
+ .dai_drv = &ak4497_dai,
+ .comp_drv = &soc_codec_dev_ak4497,
+};
+
static const struct dev_pm_ops ak4458_pm = {
SET_RUNTIME_PM_OPS(ak4458_runtime_suspend, ak4458_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
@@ -592,6 +661,7 @@ static const struct dev_pm_ops ak4458_pm = {
static int ak4458_i2c_probe(struct i2c_client *i2c)
{
struct ak4458_priv *ak4458;
+ const struct ak4458_drvdata *drvdata;
int ret;
ak4458 = devm_kzalloc(&i2c->dev, sizeof(*ak4458), GFP_KERNEL);
@@ -605,6 +675,8 @@ static int ak4458_i2c_probe(struct i2c_client *i2c)
i2c_set_clientdata(i2c, ak4458);
ak4458->dev = &i2c->dev;
+ drvdata = of_device_get_match_data(&i2c->dev);
+
ak4458->reset_gpiod = devm_gpiod_get_optional(ak4458->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(ak4458->reset_gpiod))
@@ -615,8 +687,8 @@ static int ak4458_i2c_probe(struct i2c_client *i2c)
if (IS_ERR(ak4458->mute_gpiod))
return PTR_ERR(ak4458->mute_gpiod);
- ret = devm_snd_soc_register_component(ak4458->dev, &soc_codec_dev_ak4458,
- &ak4458_dai, 1);
+ ret = devm_snd_soc_register_component(ak4458->dev, drvdata->comp_drv,
+ drvdata->dai_drv, 1);
if (ret < 0) {
dev_err(ak4458->dev, "Failed to register CODEC: %d\n", ret);
return ret;
@@ -635,7 +707,8 @@ static int ak4458_i2c_remove(struct i2c_client *i2c)
}
static const struct of_device_id ak4458_of_match[] = {
- { .compatible = "asahi-kasei,ak4458", },
+ { .compatible = "asahi-kasei,ak4458", .data = &ak4458_drvdata},
+ { .compatible = "asahi-kasei,ak4497", .data = &ak4497_drvdata},
{ },
};
--
2.17.1
next prev parent reply other threads:[~2019-01-04 16:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-04 16:27 [PATCH 0/2] Add support for AK4497 codec Daniel Baluta
2019-01-04 16:27 ` Daniel Baluta [this message]
2019-01-07 18:58 ` Applied "ASoC: ak4458: Add support for AK4497" to the asoc tree Mark Brown
2019-01-04 16:27 ` [PATCH 2/2] ASoC: dt-bindings: Document support for ak4497 Daniel Baluta
2019-01-07 18:58 ` Applied "ASoC: dt-bindings: Document support for ak4497" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190104162649.13103-2-daniel.baluta@nxp.com \
--to=daniel.baluta@nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cosmin.samoila@nxp.com \
--cc=daniel.baluta@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=viorel.suman@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).