From mboxrd@z Thu Jan  1 00:00:00 1970
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: Re: [PATCH v3 2/4] arm64: dts: actions: s700: Add I2C controller
 nodes
Date: Sat, 5 Jan 2019 23:28:43 +0530
Message-ID: <20190105175843.GA32306@Mani-XPS-13-9360>
References: <20181211080448.24007-1-pn@denx.de>
 <20181211080448.24007-3-pn@denx.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20181211080448.24007-3-pn@denx.de>
Sender: linux-kernel-owner@vger.kernel.org
To: Parthiban Nallathambi <pn@denx.de>
Cc: afaerber@suse.de, robh+dt@kernel.org, mark.rutland@arm.com, wsa@the-dreams.de, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux@cubietech.com, thomas.liau@actions-semi.com, linux-actions@lists.infradead.org
List-Id: devicetree@vger.kernel.org

On Tue, Dec 11, 2018 at 09:04:46AM +0100, Parthiban Nallathambi wrote:
> Add I2C controller nodes for Actions Semiconductor S700 SoC.
> 
> Signed-off-by: Parthiban Nallathambi <pn@denx.de>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Applied to dt-next branch where I have been collecting patches for
Andreas.

Thanks,
Mani

> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 40 +++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 192c7b39c8c1..35fddba2af1c 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -174,6 +174,46 @@
>  			#clock-cells = <1>;
>  		};
>  
> +		i2c0: i2c@e0170000 {
> +			compatible = "actions,s700-i2c";
> +			reg = <0 0xe0170000 0 0x1000>;
> +			clocks = <&cmu CLK_I2C0>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@e0174000 {
> +			compatible = "actions,s700-i2c";
> +			reg = <0 0xe0174000 0 0x1000>;
> +			clocks = <&cmu CLK_I2C1>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@e0178000 {
> +			compatible = "actions,s700-i2c";
> +			reg = <0 0xe0178000 0 0x1000>;
> +			clocks = <&cmu CLK_I2C2>;
> +			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c@e017c000 {
> +			compatible = "actions,s700-i2c";
> +			reg = <0 0xe017c000 0 0x1000>;
> +			clocks = <&cmu CLK_I2C3>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		sps: power-controller@e01b0100 {
>  			compatible = "actions,s700-sps";
>  			reg = <0x0 0xe01b0100 0x0 0x100>;
> -- 
> 2.17.2
>