From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Jourdan Subject: [PATCH v2 0/2] arm64: dts: meson: add simple-framebuffer nodes Date: Mon, 7 Jan 2019 10:53:05 +0100 Message-ID: <20190107095307.15233-1-mjourdan@baylibre.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: devicetree@vger.kernel.org Cc: Maxime Jourdan , Kevin Hilman , Rob Herring , Neil Armstrong , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org List-Id: devicetree@vger.kernel.org This patch series adds support for simplefb for the GXBB and GXL chips. simple-framebuffer allows sharing a framebuffer already setup by the firmware to the kernel for a seamless boot transition. It goes along with a u-boot patch series adding display support to GXBB & GXL that is not sent yet. Changes since v1 [1]: - added cover letter - added simple-framebuffer compatible fallback to the bindings - Updated node names and removed the unit-address - Consolidated base nodes in meson-gx.dtsi [1] https://patchwork.kernel.org/patch/10720879/ Maxime Jourdan (2): dt-bindings: meson: add specific simplefb bindings arm64: dts: meson-gx: add support for simplefb .../display/simple-framebuffer-meson.txt | 33 +++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 22 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 ++++ 4 files changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/simple-framebuffer-meson.txt -- 2.20.1