From: Thierry Reding <thierry.reding@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, mperttunen@nvidia.com,
jonathanh@nvidia.com, adrian.hunter@intel.com,
ulf.hansson@linaro.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org
Subject: Re: [PATCH V3 1/3] dt-bindings: mmc: tegra: Add pinctrl for pad drive strength config
Date: Thu, 10 Jan 2019 15:48:53 +0100 [thread overview]
Message-ID: <20190110144853.GB25353@ulmo> (raw)
In-Reply-To: <1546462674-22856-1-git-send-email-skomatineni@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 1883 bytes --]
On Wed, Jan 02, 2019 at 12:57:52PM -0800, Sowjanya Komatineni wrote:
> Add pinctrl for 3V3 and 1V8 pad drive strength configuration for
> Tegra210 sdmmc which has pad configuration registers in the pinmux
> reigster domain.
> Pad drive strengths for Tegra186 and Later are
> part of SDMMC device node itself.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
Hi Rob,
any chance you could take a look at this?
Thanks,
Thierry
> diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> index 32b4b4e41923..2cecdc71d94c 100644
> --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> @@ -39,12 +39,16 @@ sdhci@c8000200 {
> bus-width = <8>;
> };
>
> -Optional properties for Tegra210 and Tegra186:
> +Optional properties for Tegra210, Tegra186 and Tegra194:
> - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
> configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
> for controllers supporting multiple voltage levels. The order of names
> should correspond to the pin configuration states in pinctrl-0 and
> pinctrl-1.
> +- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
> + Tegra210 where pad config registers are in the pinmux register domain
> + for pull-up-strength and pull-down-strength values configuration when
> + using pads at 3V3 and 1V8 levels.
> - nvidia,only-1-8-v : The presence of this property indicates that the
> controller operates at a 1.8 V fixed I/O voltage.
> - nvidia,pad-autocal-pull-up-offset-3v3,
> --
> 2.7.4
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-01-10 14:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-02 20:57 [PATCH V3 1/3] dt-bindings: mmc: tegra: Add pinctrl for pad drive strength config Sowjanya Komatineni
2019-01-02 20:57 ` [PATCH V3 2/3] arm64: dts: tegra: Add SDMMC Auto-cal settings Sowjanya Komatineni
2019-01-02 20:57 ` [PATCH V3 3/3] mmc: tegra: SDMMC pads auto-calibration Sowjanya Komatineni
2019-01-10 15:06 ` Thierry Reding
2019-01-10 19:19 ` Sowjanya Komatineni
2019-01-10 14:48 ` Thierry Reding [this message]
2019-01-11 16:11 ` [PATCH V3 1/3] dt-bindings: mmc: tegra: Add pinctrl for pad drive strength config Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190110144853.GB25353@ulmo \
--to=thierry.reding@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mperttunen@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=skomatineni@nvidia.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).