From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH v2 10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs Date: Fri, 11 Jan 2019 14:31:33 +0100 Message-ID: <20190111133133.24803-11-miquel.raynal@bootlin.com> References: <20190111133133.24803-1-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190111133133.24803-1-miquel.raynal@bootlin.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Kishon Vijay Abraham I , Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Rob Herring , Mark Rutland , Greg Kroah-Hartman , Mathias Nyman , Alan Stern Cc: devicetree@vger.kernel.org, Antoine Tenart , linux-usb@vger.kernel.org, Maxime Chevallier , Nadav Haklai , Thomas Petazzoni , Miquel Raynal , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Reference the PHY nodes from the USB controller nodes. The USB3 host controller is wired to: * the first PHY of the COMPHY IP * the OTG-capable UTMI PHY The USB2 host controller is wired to: * the host-only UTMI PHY Signed-off-by: Miquel Raynal --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d87db3d4cc3d..f32dd1d048e4 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -347,6 +347,8 @@ marvell,usb-misc-reg = <&usb32_syscon>; interrupts = ; clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; }; @@ -367,6 +369,8 @@ reg = <0x5e000 0x1000>; marvell,usb-misc-reg = <&usb2_syscon>; interrupts = ; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; }; -- 2.19.1