* [PATCH V3 01/10] input: touchscreen: ili210x: Add DT binding document
[not found] <20190103012938.7442-1-marex@denx.de>
@ 2019-01-03 1:29 ` Marek Vasut
2019-01-11 16:11 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Marek Vasut @ 2019-01-03 1:29 UTC (permalink / raw)
To: linux-input
Cc: Marek Vasut, Dmitry Torokhov, Henrik Rydberg, Olivier Sobrie,
Philipp Puschmann, Rob Herring, devicetree
Add DT binding document for the Ilitek ILI210x and ILI251x
touchscreen controllers.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Olivier Sobrie <olivier@sobrie.be>
Cc: Philipp Puschmann <pp@emlix.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
To: linux-input@vger.kernel.org
---
V2: New patch
V3: Replace touch@ with touchscreen@
---
.../bindings/input/ilitek,ili2xxx.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
new file mode 100644
index 000000000000..b2a76301e632
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@@ -0,0 +1,25 @@
+Ilitek ILI210x/ILI251x touchscreen controller
+
+Required properties:
+- compatible:
+ ilitek,ili210x for ILI210x
+ ilitek,ili251x for ILI251x
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchscreen's IRQ output
+ See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
+Example:
+
+ touchscreen@41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ };
--
2.19.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V3 01/10] input: touchscreen: ili210x: Add DT binding document
2019-01-03 1:29 ` [PATCH V3 01/10] input: touchscreen: ili210x: Add DT binding document Marek Vasut
@ 2019-01-11 16:11 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2019-01-11 16:11 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-input, Dmitry Torokhov, Henrik Rydberg, Olivier Sobrie,
Philipp Puschmann, devicetree
On Thu, 3 Jan 2019 02:29:29 +0100, Marek Vasut wrote:
> Add DT binding document for the Ilitek ILI210x and ILI251x
> touchscreen controllers.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Henrik Rydberg <rydberg@bitmath.org>
> Cc: Olivier Sobrie <olivier@sobrie.be>
> Cc: Philipp Puschmann <pp@emlix.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> To: linux-input@vger.kernel.org
> ---
> V2: New patch
> V3: Replace touch@ with touchscreen@
> ---
> .../bindings/input/ilitek,ili2xxx.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-11 16:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20190103012938.7442-1-marex@denx.de>
2019-01-03 1:29 ` [PATCH V3 01/10] input: touchscreen: ili210x: Add DT binding document Marek Vasut
2019-01-11 16:11 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).