From: Shawn Guo <shawnguo@kernel.org>
To: Peng Ma <peng.ma@nxp.com>
Cc: leoyang.li@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [v2] arm64: dts: lx2160a: add sata node support
Date: Wed, 16 Jan 2019 10:05:45 +0800 [thread overview]
Message-ID: <20190116020543.GB15808@dragon> (raw)
In-Reply-To: <20190114095500.1600-1-peng.ma@nxp.com>
On Mon, Jan 14, 2019 at 09:55:00AM +0000, Peng Ma wrote:
> Add sata node support and Enable sata support
I would suggest you reword the commit log like below:
Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB
boards.
>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> ---
> changed for V2:
> - put the 'status' at the end of property list
> - add lx2160aqds sata support
>
> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++
> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++
> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++
> 3 files changed, 76 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22ab..0289955 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -110,3 +110,19 @@
> &usb1 {
> status = "okay";
> };
> +
> +&sata0 {
Please sort the labeling nodes alphabetically.
Shawn
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sata2 {
> + status = "okay";
> +};
> +
> +&sata3 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f..aacca27 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -117,3 +117,19 @@
> &usb1 {
> status = "okay";
> };
> +
> +&sata0 {
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sata2 {
> + status = "okay";
> +};
> +
> +&sata3 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1..4390aea 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -762,5 +762,49 @@
> <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> dma-coherent;
> };
> +
> + sata0: sata@3200000 {
Please sort nodes with unit-address in order of the address.
Shawn
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3200000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata1: sata@3210000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3210000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata2: sata@3220000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3220000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> +
> + sata3: sata@3230000 {
> + compatible = "fsl,lx2160a-ahci";
> + reg = <0x0 0x3230000 0x0 0x10000>,
> + <0x7 0x100520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 3>;
> + dma-coherent;
> + status = "disabled";
> + };
> };
> };
> --
> 1.7.1
>
prev parent reply other threads:[~2019-01-16 2:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 9:55 [v2] arm64: dts: lx2160a: add sata node support Peng Ma
2019-01-16 2:05 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116020543.GB15808@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peng.ma@nxp.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).