From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ran Wang Subject: [PATCH 1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset Date: Wed, 16 Jan 2019 06:48:06 +0000 Message-ID: <20190116064820.20007-2-ran.wang_1@nxp.com> References: <20190116064820.20007-1-ran.wang_1@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20190116064820.20007-1-ran.wang_1@nxp.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi Cc: "linux-usb@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , Ran Wang List-Id: devicetree@vger.kernel.org When DWC3 is set to host mode by programming register DWC3_GCTL, VUBS (or its control signal) will on immediately on related Root Hub ports. Then the VUBS will be de-asserted for a little while during xhci reset (conducted by xhci driver) for a little while and back to normal. This VBUS glitch might cause some USB devices emuration fail if kernel boot with them connected. One SW workaround which can fix this is to program all PORTSC[PP] to 0 to turn off VBUS immediately after setting host mode in DWC3 driver(per signal measurement result, it will be too late to do it in xhci-plat.c or xhci.c). Signed-off-by: Ran Wang --- Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation= /devicetree/bindings/usb/dwc3.txt index 8e5265e..dadb530 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -106,6 +106,9 @@ Optional properties: When just one value, which means INCRX burst mode enabled. When more than one value, which means undefined length INCR burst type enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. + - snps,avoid-vbus-glitch-when-set-host: Power off all Root Hub ports imme= diately + after setting host mode to avoid vbus (negative) glitch happen in later + xhci reset. And the vbus will back to 5V automatically when reset done. =20 - in addition all properties from usb-xhci.txt from the current directory= are supported as well --=20 1.7.1