devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ran Wang <ran.wang_1@nxp.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Felipe Balbi <balbi@kernel.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Ran Wang <ran.wang_1@nxp.com>
Subject: [PATCH 2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot
Date: Wed, 16 Jan 2019 06:48:09 +0000	[thread overview]
Message-ID: <20190116064820.20007-3-ran.wang_1@nxp.com> (raw)
In-Reply-To: <20190116064820.20007-1-ran.wang_1@nxp.com>

When DWC3 is set to host mode by programming register DWC3_GCTL, VUBS
(or its control signal) will be turned on immediately on related Root Hub
ports. Then, the VUBS is turned off for a little while(15us) when do xhci
reset (conducted by xhci driver) and back to normal finally, we can
observed a negative glitch of related signal from scope.

This VBUS glitch might cause some USB devices enumeration fail if kernel
boot with them connected. Such as LS1012AFWRY/LS1043ARDB/LX2160AQDS
/LS1088ARDB with Kingston 16GB USB2.0/Kingston USB3.0/JetFlash Transcend
4GB USB2.0 drives. The fail cases include enumerated as full-speed device
or report wrong device descriptor, etc.

One SW workaround which can fix this is to program all xhci PORTSC[PP]
to 0 to turn off VBUS immediately after setting host mode in DWC3 driver
(per signal measurement result, it will be too late to do it in
xhci-plat.c or xhci.c). Then, after xhci reset complete in xhci driver,
PORTSC[PP]s' value will back to 1 automatically and VBUS on at that time,
no glitch happen and normal enumeration process has no impact.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
 drivers/usb/dwc3/core.c |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |   10 +++++++++-
 2 files changed, 56 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a1b126f..1508397 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -100,6 +100,41 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 	return 0;
 }
 
+/*
+ * dwc3_power_of_all_roothub_ports - Power off all Root hub ports
+ * @dwc3: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+	int i, port_num;
+	u32 reg, op_regs_base, offset;
+	void __iomem		*xhci_regs;
+
+	/* xhci regs is not mapped yet, do it temperary here */
+	if (dwc->xhci_resources[0].start) {
+		xhci_regs = ioremap(dwc->xhci_resources[0].start,
+				DWC3_XHCI_REGS_END);
+		if (IS_ERR(xhci_regs)) {
+			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+			return;
+		}
+
+		op_regs_base = HC_LENGTH(readl(xhci_regs));
+		reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+		port_num = HCS_MAX_PORTS(reg);
+
+		for (i = 1; i <= port_num; i++) {
+			offset = op_regs_base + XHCI_PORTSC_BASE + 0x10*(i-1);
+			reg = readl(xhci_regs + offset);
+			reg &= ~PORT_POWER;
+			writel(reg, xhci_regs + offset);
+		}
+
+		iounmap(xhci_regs);
+	} else
+		dev_err(dwc->dev, "xhci base reg invalid\n");
+}
+
 void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
@@ -109,6 +144,15 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	reg |= DWC3_GCTL_PRTCAPDIR(mode);
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
+	/*
+	 * We have to power off all Root hub ports immediately after DWC3 set
+	 * to host mode to avoid VBUS glitch happen when xhci get reset later.
+	 */
+	if (dwc->avoid_vbus_glitch_when_set_host) {
+		if (mode == DWC3_GCTL_PRTCAP_HOST)
+			dwc3_power_off_all_roothub_ports(dwc);
+	}
+
 	dwc->current_dr_role = mode;
 }
 
@@ -1306,6 +1350,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
 
+	dwc->avoid_vbus_glitch_when_set_host = device_property_read_bool(dev,
+				"snps,avoid-vbus-glitch-when-set-host");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df87641..691093b 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -606,6 +606,14 @@
 #define DWC3_OSTS_VBUSVLD		BIT(1)
 #define DWC3_OSTS_CONIDSTS		BIT(0)
 
+/* Partial XHCI Register and Bit fields for quirk */
+#define XHCI_HCSPARAMS1		0x4
+#define XHCI_PORTSC_BASE	0x400
+#define PORT_POWER			(1 << 9)
+#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
+#define XHCI_HC_LENGTH(p)	(((p)>>00)&0x00ff)
+#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
+
 /* Structures */
 
 struct dwc3_trb;
@@ -1209,6 +1217,7 @@ struct dwc3 {
 	unsigned		tx_de_emphasis:2;
 
 	unsigned		dis_metastability_quirk:1;
+	unsigned		avoid_vbus_glitch_when_set_host:1;
 
 	u16			imod_interval;
 };
@@ -1217,7 +1226,6 @@ struct dwc3 {
 #define INCRX_UNDEF_LENGTH_BURST_MODE 1
 
 #define work_to_dwc(w)		(container_of((w), struct dwc3, drd_work))
-
 /* -------------------------------------------------------------------------- */
 
 struct dwc3_event_type {
-- 
1.7.1

  parent reply	other threads:[~2019-01-16  6:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-16  6:48 [PATCH 0/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset Ran Wang
2019-01-16  6:48 ` [PATCH 1/2] " Ran Wang
2019-01-16  7:05   ` Ran Wang
2019-01-22  1:03   ` Rob Herring
2019-01-22  2:38     ` Ran Wang
2019-01-22 13:45       ` Rob Herring
2019-01-16  6:48 ` Ran Wang [this message]
2019-01-16  8:21   ` [PATCH 2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot Felipe Balbi
2019-01-16 13:11   ` kbuild test robot
2019-02-15  8:39     ` Ran Wang
  -- strict thread matches above, loose matches on Subject: below --
2024-01-19 21:31 [PATCH 1/2] dt-bindings: usb: dwc3: Add snps,host-vbus-glitches avoiding vbus glitch Frank Li
2024-01-19 21:31 ` [PATCH 2/2] usb: dwc3: Add workaround for host mode VBUS glitch when boot Frank Li
2024-01-20  0:51   ` Thinh Nguyen
2024-01-20  0:55     ` Thinh Nguyen
2024-01-20  2:00     ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116064820.20007-3-ran.wang_1@nxp.com \
    --to=ran.wang_1@nxp.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).