From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH v11 4/9] soc: qcom: rpmpd: Add a Power domain driver to model corners Date: Thu, 17 Jan 2019 09:42:54 -0800 Message-ID: <20190117174254.GA17273@roeck-us.net> References: <20190110040209.6028-1-rnayak@codeaurora.org> <20190110040209.6028-5-rnayak@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190110040209.6028-5-rnayak@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Rajendra Nayak Cc: andy.gross@linaro.org, robh@kernel.org, viresh.kumar@linaro.org, sboyd@kernel.org, ulf.hansson@linaro.org, collinsd@codeaurora.org, mka@chromium.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, henryc.chen@mediatek.com List-Id: devicetree@vger.kernel.org On Thu, Jan 10, 2019 at 09:32:04AM +0530, Rajendra Nayak wrote: > The Power domains for corners just pass the performance state set by the > consumers to the RPM (Remote Power manager) which then takes care > of setting the appropriate voltage on the corresponding rails to > meet the performance needs. > > We add all power domain data needed on msm8996 here. This driver can easily > be extended by adding data for other qualcomm SoCs as well. > > Signed-off-by: Rajendra Nayak > Signed-off-by: Viresh Kumar > Reviewed-by: Ulf Hansson > Acked-by: Rob Herring > Reviewed-by: Stephen Boyd > --- > drivers/soc/qcom/Kconfig | 9 ++ > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/rpmpd.c | 282 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 292 insertions(+) > create mode 100644 drivers/soc/qcom/rpmpd.c > > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index fcbf8a2e4080..df5cd9fa0d5e 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -98,6 +98,15 @@ config QCOM_RPMH > of hardware components aggregate requests for these resources and > help apply the aggregated state on the resource. > > +config QCOM_RPMPD > + bool "Qualcomm RPM Power domain driver" > + depends on MFD_QCOM_RPM && QCOM_SMD_RPM Since this is bool, but the dependent configurations are tristate, configurations such as arm64:allmodconfig result in CONFIG_QCOM_RPMPD=y CONFIG_MFD_QCOM_RPM=m CONFIG_QCOM_SMD_RPM=m This in turn results in arm-linux-gnueabi-ld: drivers/soc/qcom/rpmpd.o: in function `rpmpd_send_enable': >> rpmpd.c:(.text+0x64): undefined reference to `qcom_rpm_smd_write' arm-linux-gnueabi-ld: drivers/soc/qcom/rpmpd.o: in function `rpmpd_power_on': rpmpd.c:(.text+0x408): undefined reference to `qcom_rpm_smd_write' >> arm-linux-gnueabi-ld: rpmpd.c:(.text+0x460): undefined reference to `qcom_rpm_smd_write' as reported by 0day. Either this needs to change to tristate, or the dependency must be depends on MFD_QCOM_RPM=y && QCOM_SMD_RPM=y Guenter