From mboxrd@z Thu Jan  1 00:00:00 1970
From: Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 2/8] dt-bindings: mtd: ingenic: Add compatible strings for the JZ4725B
Date: Thu, 17 Jan 2019 22:06:28 -0300
Message-ID: <20190118010634.27399-2-paul@crapouillou.net>
References: <20190118010634.27399-1-paul@crapouillou.net>
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20190118010634.27399-1-paul@crapouillou.net>
Sender: linux-kernel-owner@vger.kernel.org
To: David Woodhouse <dwmw2@infradead.org>, Brian Norris <computersforpeace@gmail.com>, Boris Brezillon <bbrezillon@kernel.org>, Marek Vasut <marek.vasut@gmail.com>, Richard Weinberger <richard@nod.at>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Paul Burton <paul.burton@mips.com>, James Hogan <jhogan@kernel.org>, Miquel Raynal <miquel.raynal@bootlin.com>, Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
List-Id: devicetree@vger.kernel.org

Add compatible strings to probe the jz4780-nand and jz4780-bch drivers
from devicetree on the JZ4725B SoC from Ingenic.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
index 29ea5853ca91..8ebed442ac55 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -6,7 +6,9 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
 be children of the NEMC node.
 
 Required NAND controller device properties:
-- compatible: Should be set to "ingenic,jz4780-nand".
+- compatible: Should be one of:
+  * ingenic,jz4725b-nand
+  * ingenic,jz4780-nand
 - reg: For each bank with a NAND chip attached, should specify a bank number,
   an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
 
@@ -72,7 +74,9 @@ NAND devices. The following is a description of the device properties for a
 BCH controller.
 
 Required BCH properties:
-- compatible: Should be set to "ingenic,jz4780-bch".
+- compatible: Should be one of:
+  * ingenic,jz4725b-bch
+  * ingenic,jz4780-bch
 - reg: Should specify the BCH controller registers location and length.
 - clocks: Clock for the BCH controller.
 
-- 
2.11.0