* [PATCH v2] arm: sun8i-h3-nanopi-m1-plus: enable HDMI
@ 2019-01-22 7:46 Corentin Labbe
[not found] ` <1548143206-11404-1-git-send-email-clabbe-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Corentin Labbe @ 2019-01-22 7:46 UTC (permalink / raw)
To: mark.rutland, maxime.ripard, robh+dt, wens
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi,
Corentin Labbe
This patch enable HDMI output on sun8i-h3-nanopi-m1-plus.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
Change since v1:
- removed status=okay from hdmi_out
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 65cba1050802..4ec94d72f021 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -67,6 +67,21 @@
pinctrl-names = "default";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci1 {
@@ -94,6 +109,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
--
2.19.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] arm: sun8i-h3-nanopi-m1-plus: enable HDMI
[not found] ` <1548143206-11404-1-git-send-email-clabbe-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
@ 2019-01-23 10:40 ` Maxime Ripard
0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2019-01-23 10:40 UTC (permalink / raw)
To: Corentin Labbe
Cc: mark.rutland-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
wens-jdAy2FN1RRM, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 368 bytes --]
On Tue, Jan 22, 2019 at 07:46:46AM +0000, Corentin Labbe wrote:
> This patch enable HDMI output on sun8i-h3-nanopi-m1-plus.
>
> Signed-off-by: Corentin Labbe <clabbe-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
The prefix must be "ARM: dts:"
I've fixed it and applied, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-23 10:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-01-22 7:46 [PATCH v2] arm: sun8i-h3-nanopi-m1-plus: enable HDMI Corentin Labbe
[not found] ` <1548143206-11404-1-git-send-email-clabbe-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2019-01-23 10:40 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).