From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Masney Subject: [PATCH 8/9] arm: dts: qcom: mdm9615: add interrupt controller properties Date: Fri, 25 Jan 2019 11:23:01 -0500 Message-ID: <20190125162302.14036-9-masneyb@onstation.org> References: <20190125162302.14036-1-masneyb@onstation.org> Return-path: In-Reply-To: <20190125162302.14036-1-masneyb@onstation.org> Sender: linux-kernel-owner@vger.kernel.org To: linus.walleij@linaro.org, sboyd@kernel.org, bjorn.andersson@linaro.org, andy.gross@linaro.org, marc.zyngier@arm.com, lee.jones@linaro.org Cc: tglx@linutronix.de, shawnguo@kernel.org, dianders@chromium.org, linux-gpio@vger.kernel.org, nicolas.dechesne@linaro.org, niklas.cassel@linaro.org, david.brown@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, thierry.reding@gmail.com, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org Add interrupt controller properties now that ssbi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. Note that the IRQs started at 24 instead of 192 like all of the other PMICs. This is the same IRQs as the MPP for this board. qcom-pm8xxx.c doesn't set the shared IRQs so this is highly likely to be a copy and paste error. Signed-off-by: Brian Masney --- arch/arm/boot/dts/qcom-mdm9615.dtsi | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index c852b69229c9..0ed6fc3e873c 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; -- 2.17.2