From: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
To: thierry.reding@gmail.com
Cc: airlied@linux.ie, daniel@ffwll.ch, robh+dt@kernel.org,
mark.rutland@arm.com, m.szyprowski@samsung.com, krzk@kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Jonathan Bakker" <xc-racer2@live.ca>,
"Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Subject: [PATCH 1/2] drm: panel: Add Samsung s6e63m0 panel documentation
Date: Fri, 25 Jan 2019 17:46:44 +0100 [thread overview]
Message-ID: <20190125164645.19208-1-pawel.mikolaj.chmiel@gmail.com> (raw)
From: Jonathan Bakker <xc-racer2@live.ca>
This commit adds documentation for Samsung s6e63m0 AMOLED LCD panel
driver.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
.../display/panel/samsung,s6e63m0.txt | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
new file mode 100644
index 000000000000..4979200e2dd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
@@ -0,0 +1,60 @@
+Samsung s6e63m0 AMOLED LCD panel
+
+Required properties:
+ - compatible: "samsung,s6e63m0"
+ - reset-gpio: GPIO spec for reset pin
+ - vdd3-supply: VDD regulator
+ - vci-supply: VCI regulator
+ - display-timings: timings for the connected panel as described by [1]
+
+Optional properties:
+ - reset-delay: Delay in ms after adjusting reset-gpio, default 120ms
+ - power-on-delay: Delay in ms after powering on, default 25ms
+ - power-off-delay: Delay in ms before powering off, default 200ms
+ - panel-width-mm: physical panel width in mm
+ - panel-height-mm: physical panel height in mm
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ s6e63m0: display@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ reset-gpio = <&mp05 5 1>;
+ vdd3-supply = <&ldo12_reg>;
+ vci-supply = <&ldo11_reg>;
+ spi-max-frequency = <1000000>;
+
+ power-on-delay = <0>;
+ power-off-delay = <0>;
+ reset-delay = <10>;
+ panel-width-mm = <53>;
+ panel-height-mm = <89>;
+
+ display-timings {
+ timing-0 {
+ /* 480x800@60Hz */
+ clock-frequency = <25628040>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <16>;
+ hback-porch = <16>;
+ hsync-len = <2>;
+ vfront-porch = <28>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_ep>;
+ };
+ };
+ };
--
2.17.1
next reply other threads:[~2019-01-25 16:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 16:46 Paweł Chmiel [this message]
2019-01-25 16:46 ` [PATCH 2/2] drm/panel: Add driver for Samsung S6E63M0 panel Paweł Chmiel
2019-01-26 21:41 ` Sam Ravnborg
2019-01-28 13:47 ` Andrzej Hajda
2019-01-28 16:24 ` Paweł Chmiel
2019-01-26 20:55 ` [PATCH 1/2] drm: panel: Add Samsung s6e63m0 panel documentation Sam Ravnborg
2019-01-26 21:23 ` Paweł Chmiel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125164645.19208-1-pawel.mikolaj.chmiel@gmail.com \
--to=pawel.mikolaj.chmiel@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=xc-racer2@live.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).