From: Andreas Kemnade <andreas@kemnade.info>
To: bcousson@baylibre.com, tony@atomide.com, robh+dt@kernel.org,
mark.rutland@arm.com, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
letux-kernel@openphoenux.org
Cc: Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH] arm: dts: gta04: add gps support
Date: Fri, 25 Jan 2019 20:43:10 +0100 [thread overview]
Message-ID: <20190125194310.11170-1-andreas@kemnade.info> (raw)
The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
which one is mounted so use the compatibility entry for w2sg0004
for all which will work for both.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
w2sg0004 bindings (together with the corresponding support is in
https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss gnss-next)
arch/arm/boot/dts/omap3-gta04.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e53d32691308..d58c117e429f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -312,6 +312,12 @@
>;
};
+ gps_pins: pinmux_gps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+ >;
+ };
+
hdq_pins: hdq_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
@@ -644,6 +650,13 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+ gps: gps {
+ compatible = "wi2wi,w2sg0004";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gps_pins>;
+ sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ lna-supply = <&vsim>;
+ };
};
&uart3 {
--
2.11.0
next reply other threads:[~2019-01-25 19:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 19:43 Andreas Kemnade [this message]
2019-01-28 7:53 ` [PATCH] arm: dts: gta04: add gps support Johan Hovold
2019-01-28 16:44 ` Andreas Kemnade
2019-01-30 9:02 ` Johan Hovold
2019-01-30 14:06 ` [Letux-kernel] " H. Nikolaus Schaller
2019-01-30 20:11 ` Andreas Kemnade
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125194310.11170-1-andreas@kemnade.info \
--to=andreas@kemnade.info \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=letux-kernel@openphoenux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).