From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johan Hovold Subject: Re: [PATCH] arm: dts: gta04: add gps support Date: Mon, 28 Jan 2019 08:53:56 +0100 Message-ID: <20190128075356.GJ3691@localhost> References: <20190125194310.11170-1-andreas@kemnade.info> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190125194310.11170-1-andreas@kemnade.info> Sender: linux-kernel-owner@vger.kernel.org To: Andreas Kemnade Cc: bcousson@baylibre.com, tony@atomide.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org List-Id: devicetree@vger.kernel.org On Fri, Jan 25, 2019 at 08:43:10PM +0100, Andreas Kemnade wrote: > The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable > which one is mounted so use the compatibility entry for w2sg0004 > for all which will work for both. > > Signed-off-by: Andreas Kemnade > --- > w2sg0004 bindings (together with the corresponding support is in > https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss gnss-next) > arch/arm/boot/dts/omap3-gta04.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi > index e53d32691308..d58c117e429f 100644 > --- a/arch/arm/boot/dts/omap3-gta04.dtsi > +++ b/arch/arm/boot/dts/omap3-gta04.dtsi > @@ -312,6 +312,12 @@ > >; > }; > > + gps_pins: pinmux_gps_pins { > + pinctrl-single,pins = < > + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ > + >; > + }; > + > hdq_pins: hdq_pins { > pinctrl-single,pins = < > OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ > @@ -644,6 +650,13 @@ > &uart2 { > pinctrl-names = "default"; > pinctrl-0 = <&uart2_pins>; > + gps: gps { The node should be named "gnss" as per the binding. > + compatible = "wi2wi,w2sg0004"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gps_pins>; > + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; > + lna-supply = <&vsim>; Also, the vcc-supply is a required property. > + }; > }; > > &uart3 { Johan