From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Subject: [PATCH v8 2/5] media: sun6i: Add A64 CSI block support Date: Mon, 28 Jan 2019 14:28:44 +0530 Message-ID: <20190128085847.7217-3-jagan@amarulasolutions.com> References: <20190128085847.7217-1-jagan@amarulasolutions.com> Reply-To: jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20190128085847.7217-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Yong Deng , Mauro Carvalho Chehab , Maxime Ripard , Chen-Yu Tsai , Rob Herring , Mark Rutland Cc: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Michael Trimarchi , linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Jagan Teki List-Id: devicetree@vger.kernel.org CSI block in Allwinner A64 has similar features as like in H3, but the default CSI_SCLK rate cannot work properly to drive the connected sensor interface. The tested mod cock rate is 300 MHz and BSP vfe media driver is also using the same rate. Unfortunately there is no valid information about clock rate in manual or any other sources except the BSP driver. so more faith on BSP code, because same has tested in mainline. So, add support for A64 CSI block by setting updated mod clock rate. Signed-off-by: Jagan Teki --- drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c index ee882b66a5ea..5ecdfbf9f6ae 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -154,6 +155,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable) { struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi); + struct device *dev = sdev->dev; struct regmap *regmap = sdev->regmap; int ret; @@ -161,6 +163,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable) regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0); clk_disable_unprepare(sdev->clk_ram); + if (of_device_is_compatible(dev->of_node, + "allwinner,sun50i-a64-csi")) + clk_rate_exclusive_put(sdev->clk_mod); clk_disable_unprepare(sdev->clk_mod); reset_control_assert(sdev->rstc_bus); return 0; @@ -172,6 +177,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable) return ret; } + if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi")) + clk_set_rate_exclusive(sdev->clk_mod, 300000000); + ret = clk_prepare_enable(sdev->clk_ram); if (ret) { dev_err(sdev->dev, "Enable clk_dram_csi clk err %d\n", ret); @@ -191,6 +199,8 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable) clk_ram_disable: clk_disable_unprepare(sdev->clk_ram); clk_mod_disable: + if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi")) + clk_rate_exclusive_put(sdev->clk_mod); clk_disable_unprepare(sdev->clk_mod); return ret; } @@ -895,6 +905,7 @@ static const struct of_device_id sun6i_csi_of_match[] = { { .compatible = "allwinner,sun6i-a31-csi", }, { .compatible = "allwinner,sun8i-h3-csi", }, { .compatible = "allwinner,sun8i-v3s-csi", }, + { .compatible = "allwinner,sun50i-a64-csi", }, {}, }; MODULE_DEVICE_TABLE(of, sun6i_csi_of_match); -- 2.18.0.321.gffc6fa0e3