From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomasz Duszynski Subject: Re: [PATCH v2 3/3] dt-bindings: iio: chemical: pms7003: add device tree support Date: Mon, 28 Jan 2019 19:43:33 +0100 Message-ID: <20190128184332.GA25627@arch> References: <20190127181916.19948-1-tduszyns@gmail.com> <20190127181916.19948-4-tduszyns@gmail.com> <20190128075819.GK3691@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Return-path: Content-Disposition: inline In-Reply-To: <20190128075819.GK3691@localhost> Sender: linux-kernel-owner@vger.kernel.org To: Johan Hovold Cc: Tomasz Duszynski , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh@kernel.org, jic23@jic23.retrosnub.co.uk List-Id: devicetree@vger.kernel.org On Mon, Jan 28, 2019 at 08:58:19AM +0100, Johan Hovold wrote: > On Sun, Jan 27, 2019 at 07:19:16PM +0100, Tomasz Duszynski wrote: > > Add device tree support for Plantower PMS7003 particulate matter sensor. > > > > Signed-off-by: Tomasz Duszynski > > --- > > .../iio/chemical/plantower,pms7003.txt | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > > > diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > new file mode 100644 > > index 000000000000..e4c7f2fb1e30 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > @@ -0,0 +1,19 @@ > > +* Plantower PMS7003 particulate matter sensor > > + > > +Required properties: > > +- compatible: must be "plantower,pms7003" > > + > > +Optional properties: > > +- vcc-supply: phandle to the regulator that provides power to the sensor > > Shouldn't this one be a required property? > Driver does not use regulator framework hence to me this property fits here better. > > +- set-gpios: phandle to the GPIO connected to the SET line > > +- reset-gpios: phandle to the GPIO connected to the RESET line > > + > > +Refer to serial/slave-device.txt for generic serial attached device bindings. > > + > > +Example: > > + > > +&uart0 { > > + pms7003 { > > The node name should be generic and reflect the functionality rather > than model. Perhaps "pms" will do here. > Agree, ideally we should have a generic dt name for this kind of sensors (something like air-pollution-sensor perhaps?). But unfortunately there isn't anything available now so I guess compatible part name should be okay (besides this is the type of naming commonly used in other iio bindings). > > + compatible = "plantower,pms7003"; > > + }; > > +}; > > Johan