From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Torokhov Subject: Re: [RESEND PATCH v2 8/8] Input: sx8654 - convert #defined flags to BIT(x) Date: Mon, 28 Jan 2019 16:25:18 -0800 Message-ID: <20190129002518.GH34692@dtor-ws> References: <20181218083606.25795-1-richard.leitner@skidata.com> <20181218084002.19454-1-richard.leitner@skidata.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20181218084002.19454-1-richard.leitner@skidata.com> Sender: linux-kernel-owner@vger.kernel.org To: Richard Leitner Cc: mark.rutland@arm.com, robh+dt@kernel.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Tue, Dec 18, 2018 at 09:40:02AM +0100, Richard Leitner wrote: > Some of the #defined register values are one-bit flags. Convert them to > use the BIT(x) macro instead of 1 byte hexadecimal values. This improves > readability and clarifies the intent. > > Signed-off-by: Richard Leitner Applied, thank you. > --- > drivers/input/touchscreen/sx8654.c | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > > diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c > index b7b263ed52af..3746ea855f94 100644 > --- a/drivers/input/touchscreen/sx8654.c > +++ b/drivers/input/touchscreen/sx8654.c > @@ -36,6 +36,7 @@ > #include > #include > #include > +#include > > /* register addresses */ > #define I2C_REG_TOUCH0 0x00 > @@ -46,7 +47,7 @@ > #define I2C_REG_SOFTRESET 0x3f > > #define I2C_REG_SX8650_STAT 0x05 > -#define SX8650_STAT_CONVIRQ 0x80 > +#define SX8650_STAT_CONVIRQ BIT(7) > > /* commands */ > #define CMD_READ_REGISTER 0x40 > @@ -56,8 +57,8 @@ > #define SOFTRESET_VALUE 0xde > > /* bits for I2C_REG_IRQSRC */ > -#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 > -#define IRQ_PENRELEASE 0x04 > +#define IRQ_PENTOUCH_TOUCHCONVDONE BIT(7) > +#define IRQ_PENRELEASE BIT(6) > > /* bits for RegTouch1 */ > #define CONDIRQ 0x20 > @@ -65,8 +66,8 @@ > #define FILT_7SA 0x03 > > /* bits for I2C_REG_CHANMASK */ > -#define CONV_X 0x80 > -#define CONV_Y 0x40 > +#define CONV_X BIT(7) > +#define CONV_Y BIT(6) > > /* coordinates rate: higher nibble of CTRL0 register */ > #define RATE_MANUAL 0x00 > -- > 2.11.0 > -- Dmitry