From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Date: Tue, 29 Jan 2019 16:13:48 +0100 Message-ID: <20190129151348.mh27btttsqcmeban@flea> References: <20190124195900.22620-1-jagan@amarulasolutions.com> <20190124195900.22620-12-jagan@amarulasolutions.com> <20190125212433.ni2jg3wvpyjazlxf@flea> Reply-To: maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="sk46bbi4mwes7v4f" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Jagan Teki Cc: David Airlie , Daniel Vetter , Chen-Yu Tsai , Michael Turquette , Rob Herring , Mark Rutland , linux-arm-kernel , linux-kernel , linux-clk , dri-devel , devicetree , Michael Trimarchi , linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, linux-sunxi List-Id: devicetree@vger.kernel.org --sk46bbi4mwes7v4f Content-Type: text/plain; charset="UTF-8" Content-Disposition: inline On Mon, Jan 28, 2019 at 03:06:10PM +0530, Jagan Teki wrote: > On Sat, Jan 26, 2019 at 2:54 AM Maxime Ripard wrote: > > > > On Fri, Jan 25, 2019 at 01:28:49AM +0530, Jagan Teki wrote: > > > Minimum PLL used for MIPI is 500MHz, as per manual, but > > > lowering the min rate by 300MHz can result proper working > > > nkms divider with the help of desired dclock rate from > > > panel driver. > > > > > > Signed-off-by: Jagan Teki > > > Acked-by: Stephen Boyd > > > > Going 200MHz below the minimum doesn't seem really reasonable. What > > is the issue that you are trying to fix here? > > > > It looks like it's picking bad dividers, but if that's the case, this > > isn't the proper fix. > > As I stated in earlier patches, the whole idea is pick the desired > dclk divider based dclk rate. So the dotclock, sun4i_dclk_round_rate > is unable to get the proper dclk divider at the end, so it eventually > picking up wrong divider value and fired vblank timeout. > > So, we come-up with optimal and working min_rate 300MHz in pll-mipi to > get the desired clock something like below. > [ 2.415773] [drm] No driver support for vblank timestamp query. > [ 2.424116] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > [ 2.424172] ideal = 220000000, rounded = 0 > [ 2.424176] ideal = 275000000, rounded = 0 > [ 2.424194] ccu_nkm_round_rate: rate = 330000000 > [ 2.424197] ideal = 330000000, rounded = 330000000 > [ 2.424201] sun4i_dclk_round_rate: div = 6 rate = 55000000 > [ 2.424205] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000 > [ 2.424209] ideal = 220000000, rounded = 0 > [ 2.424213] ideal = 275000000, rounded = 0 > [ 2.424230] ccu_nkm_round_rate: rate = 330000000 > [ 2.424233] ideal = 330000000, rounded = 330000000 > [ 2.424236] sun4i_dclk_round_rate: div = 6 rate = 55000000 > [ 2.424253] ccu_nkm_round_rate: rate = 330000000 > [ 2.424270] ccu_nkm_round_rate: rate = 330000000 > [ 2.424278] sun4i_dclk_recalc_rate: val = 1, rate = 330000000 > [ 2.424281] sun4i_dclk_recalc_rate: val = 1, rate = 330000000 > [ 2.424306] ccu_nkm_set_rate: rate = 330000000, parent_rate = 297000000 > [ 2.424309] ccu_nkm_set_rate: _nkm.n = 5 > [ 2.424311] ccu_nkm_set_rate: _nkm.k = 2 > [ 2.424313] ccu_nkm_set_rate: _nkm.m = 9 > [ 2.424661] sun4i_dclk_set_rate div 6 > [ 2.424668] sun4i_dclk_recalc_rate: val = 6, rate = 55000000 > > But look like this wouldn't valid for all other dclock rates, say BPI > panel has 30MHz clock that would failed with this logic. > > On the other side Allwinner BSP calculating dclk divider based on the > SoC's. for A33 [1] it is fixed dclk divider of 4 and for A64 is is > calculated based on the bpp/lanes. It looks like the A64 has the same divider of 4: https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L12 I think you're confusing it with the ratio between the pixel clock and the dotclock, called dsi_div: https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L198 Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com --sk46bbi4mwes7v4f--