From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vladimir Zapolskiy Subject: [PATCH 09/13] ARM: dts: lpc32xx: phy3250: add unit address to memory device node Date: Tue, 29 Jan 2019 21:20:45 +0200 Message-ID: <20190129192049.11223-10-vz@mleia.com> References: <20190129192049.11223-1-vz@mleia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190129192049.11223-1-vz@mleia.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Sylvain Lemieux , Russell King Cc: Mark Rutland , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The change adds a unit address to memory device node, the issue was reported as a unit_address_vs_reg warning by dtc. Root device node properties #address-cells and #size-cells were removed as inherited from lpc32xx.dtsi. Signed-off-by: Vladimir Zapolskiy --- arch/arm/boot/dts/lpc3250-phy3250.dts | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index aff72f14ad83..ebd19258e22b 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -1,6 +1,7 @@ /* * PHYTEC phyCORE-LPC3250 board * + * Copyright (C) 2015-2019 Vladimir Zapolskiy * Copyright 2012 Roland Stigge * * The code contained herein is licensed under the GNU General Public @@ -17,10 +18,8 @@ / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; -- 2.20.1