From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v3 2/2] dt-bindings: interrupt-controller: loongson ls1x
 intc
Date: Wed, 30 Jan 2019 10:41:36 -0600
Message-ID: <20190130164136.GB31687@bogus>
References: <20190122154557.22689-1-jiaxun.yang@flygoat.com>
 <20190124032730.18237-1-jiaxun.yang@flygoat.com>
 <20190124032730.18237-3-jiaxun.yang@flygoat.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20190124032730.18237-3-jiaxun.yang@flygoat.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org, tglx@linutronix.de, jason@lakedaemon.net, marc.zyngier@arm.com, mark.rutland@arm.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Thu, Jan 24, 2019 at 11:27:30AM +0800, Jiaxun Yang wrote:
> Dt-bindings doc about Loongson-1 interrupt controller
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>  .../loongson,ls1x-intc.txt                    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> new file mode 100644
> index 000000000000..a4e17c3f5f93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> @@ -0,0 +1,24 @@
> +Loongson ls1x Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "loongson,ls1x-intc". Valid strings are:
> +
> +- reg : Specifies base physical address and size of the registers.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +  interrupt source. The value shall be 1.
> +- interrupts : Specifies the CPU interrupts the controller is connected to.
> +
> +Example:
> +
> +intc: interrupt-controller@1fd01040 {
> +	compatible = "loongson,ls1x-intc";
> +	reg = <0x1fd01040 0x78>;
> +
> +	interrupt-controller;
> +	#interrupt-cells = <1>;
> +
> +	interrupt-parent = <&cpu_intc>;
> +	interrupts = <2>, <3>, <4>, <5>, <6>;
> +};
> \ No newline at end of file

Please fix.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>