From: Rob Herring <robh@kernel.org>
To: Mark Zhang <markz@nvidia.com>
Cc: lee.jones@linaro.org, blaws05@gmail.com, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: Re: [PATCH v2 2/4] mfd: max77620: add documentation for backup battery charging
Date: Wed, 30 Jan 2019 13:51:54 -0600 [thread overview]
Message-ID: <20190130195154.GA30939@bogus> (raw)
In-Reply-To: <20190129085531.32364-3-markz@nvidia.com>
On Tue, Jan 29, 2019 at 04:55:29PM +0800, Mark Zhang wrote:
> Adding documentation for 3 new backup battery charging dts
> properties:
> - maxim,backup-battery-charging-current
> - maxim,backup-battery-charging-voltage
> - maxim,backup-battery-output-resister
>
> Signed-off-by: Mark Zhang <markz@nvidia.com>
> ---
> .../devicetree/bindings/mfd/max77620.txt | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
> index 9c16d51cc15b..484b17e4fba5 100644
> --- a/Documentation/devicetree/bindings/mfd/max77620.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77620.txt
> @@ -122,6 +122,26 @@ For DT binding details of different sub modules like GPIO, pincontrol,
> regulator, power, please refer respective device-tree binding document
> under their respective sub-system directories.
>
> +Backup Battery:
> +==============
> +This sub-node configure charging backup battery of the device. Device has
> +support of charging the backup battery. The subnode name is "backup-battery".
> +The property for backup-battery child nodes as:
> +Presence of this child node will enable the backup battery charging.
> +
> +Optional properties:
> + -maxim,backup-battery-charging-current: Charging current setting.
> + The device supports 50/100/200/400/600/800uA.
> + If this property is unavailable then it will
> + charge with 50uA.
> + -maxim,backup-battery-charging-voltage: Charging Voltage Limit Setting.
> + Device supports 2500000/3000000/3300000/350000uV.
> + Default will be set to 2500mV. The voltage will be roundoff
> + to nearest lower side if other than above is configured.
> + -maxim,backup-battery-output-resister: Output resistor on Ohm.
> + Device supports 100/1000/3000/6000 Ohms.
> + Default will be set to 1000 Ohm.
These need property unit suffixes as defined in property-units.txt. The
names are kind of long, so perhaps shorten them a bit.
> +
> Example:
> --------
> #include <dt-bindings/mfd/max77620.h>
> --
> 2.19.2
>
next prev parent reply other threads:[~2019-01-30 19:51 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 8:55 [PATCH v2 0/4] Add max77620 charging & low battery support Mark Zhang
2019-01-29 8:55 ` [PATCH v2 1/4] mfd: max77620: Add backup battery charger support Mark Zhang
2019-01-29 8:55 ` [PATCH v2 2/4] mfd: max77620: add documentation for backup battery charging Mark Zhang
2019-01-30 19:51 ` Rob Herring [this message]
2019-01-31 2:26 ` Mark Zhang
2019-01-29 8:55 ` [PATCH v2 3/4] mfd: max77620: Add low battery monitor support Mark Zhang
2019-01-29 8:55 ` [PATCH v2 4/4] mfd: max77620: add documentation for low battery monitoring Mark Zhang
2019-01-30 19:53 ` Rob Herring
2019-01-31 2:29 ` Mark Zhang
2019-01-31 21:05 ` Rob Herring
2019-01-31 21:37 ` Billy laws
2019-02-07 8:48 ` [PATCH v2 0/4] Add max77620 charging & low battery support Lee Jones
2019-02-12 4:38 ` Mark Zhang
2019-02-12 8:04 ` Lee Jones
2019-02-12 8:29 ` Mark Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130195154.GA30939@bogus \
--to=robh@kernel.org \
--cc=blaws05@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=markz@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).