From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manivannan Sadhasivam Subject: Re: [PATCH v3 0/5] Add Oxalis board support Date: Fri, 1 Feb 2019 08:58:17 +0530 Message-ID: <20190201032817.GA3008@Mani-XPS-13-9360> References: <20190122042147.5424-1-manivannan.sadhasivam@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20190122042147.5424-1-manivannan.sadhasivam@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: shawnguo@kernel.org Cc: devicetree@vger.kernel.org, a.tropschug@ebs-systart.com, m.bittner@ebs-systart.com, linux-kernel@vger.kernel.org, amit.kucheria@linaro.org, leoyang.li@nxp.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Tue, Jan 22, 2019 at 09:51:42AM +0530, Manivannan Sadhasivam wrote: > Hello, > > This patchset adds Oxalis board support. This board is one of the > 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some > of the key features of this board: > > * SoC: NXP Layerscape LS1012A > * RAM: 1GB DDR3L > * PMU: NXP VR5100 > * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA > * Connectivity: 2x Ethernet > * USB: 2x USB3.0 > > More information about this board can be found in 96Boards product > page: https://www.96boards.org/product/oxalis/ > > Ethernet and SPI flash are not supported yet! > > Thanks, > Mani > Hi Shawn, Any update on this patchset? Thanks, Mani > Changes in v3: > > * Fixed LS1012A and LS1021A bindings > * Added missing devicetree compatibles for LS1021A based boards > * Added Rob's Reviewed-by tag for Vendor prefix patch > > Changes in v2: > > As per Rob's review: > > * Adopted the Oxalis board binding to JSON format. > * Sorted the EBS-SYSTART vendor prefix alphabetically. > * Used the generic node name for audio codec. > > Manivannan Sadhasivam (5): > dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based > boards > ARM: dts: Add devicetree compatibles for LS1021A based boards > dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix > dt-bindings: arm: fsl: Add devicetree binding for Oxalis > arm64: dts: freescale: Add devicetree for Oxalis > > .../devicetree/bindings/arm/fsl.yaml | 11 ++- > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 + > arch/arm/boot/dts/ls1021a-qds.dts | 1 + > arch/arm/boot/dts/ls1021a-twr.dts | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++ > 7 files changed, 111 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts > > -- > 2.17.1 >