From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Abhinav Asati <asatiabhi@codeaurora.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH] arm64: dts: qcom: Enable blsp1_uart3 for qcs404-evb
Date: Fri, 1 Feb 2019 23:36:36 +0530 [thread overview]
Message-ID: <20190201180636.7169-1-vkoul@kernel.org> (raw)
From: Shawn Guo <shawn.guo@linaro.org>
It defines pinctrl settings for blsp1_uart3 in board level dts and
enable the device by toggling 'status'.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Abhinav Asati <asatiabhi@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 50b3589c7f15..d85452f528c5 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -7,6 +7,7 @@
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart3;
};
chosen {
@@ -137,6 +138,11 @@
};
&tlmm {
+ blsp1_uart3_default: blsp1-uart3-default {
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
@@ -205,3 +211,7 @@
bias-disable;
};
};
+
+&blsp1_uart3 {
+ status = "okay";
+};
--
2.20.1
reply other threads:[~2019-02-01 18:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201180636.7169-1-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andy.gross@linaro.org \
--cc=asatiabhi@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).