From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2 03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts Date: Mon, 4 Feb 2019 08:36:37 -0800 Message-ID: <20190204163637.GK5720@atomide.com> References: <1549290167-876-1-git-send-email-rogerq@ti.com> <1549290167-876-4-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1549290167-876-4-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Roger Quadros Cc: ohad@wizery.com, bjorn.andersson@linaro.org, s-anna@ti.com, david@lechnology.com, nsekhar@ti.com, t-kristo@ti.com, nsaulnier@ti.com, jreeder@ti.com, m-karicheri2@ti.com, woods.technical@gmail.com, linux-omap@vger.kernel.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, "Andrew F. Davis" , Thomas Gleixner , Jason Cooper , Marc Zyngier , Rob Herring List-Id: devicetree@vger.kernel.org * Roger Quadros [190204 14:23]: > From: "Andrew F. Davis" > > The Programmable Real-Time Unit Subsystem (PRUSS) contains an > interrupt controller (INTC) that can handle various system input > events and post interrupts back to the device-level initiators. > The INTC can support upto 64 input events with individual control > configuration and hardware prioritization. These events are mapped > onto 10 interrupt signals through two levels of many-to-one mapping > support. Different interrupt signals are routed to the individual > PRU cores or to the host CPU. > > The PRUSS INTC platform driver manages this PRUSS interrupt > controller and implements an irqchip driver to provide a Linux > standard way for the PRU client users to enable/disable/ack/ > re-trigger a PRUSS system event. The system events to interrupt > channels and host interrupts relies on the mapping configuration > provided through a firmware resource table for now. This will be > revisited and enhanced in the future for a better interface. The > mappings will currently be programmed during the boot/shutdown > of the PRU. Acked-by: Tony Lindgren