From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Cercueil Subject: [PATCH v3 1/9] dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725B Date: Mon, 4 Feb 2019 16:04:18 -0300 Message-ID: <20190204190426.11618-1-paul@crapouillou.net> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Rob Herring , Mark Rutland , Miquel Raynal , Harvey Hunt Cc: Mathieu Malaterre , linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Paul Cercueil List-Id: devicetree@vger.kernel.org Add compatible strings to probe the jz4780-nand and jz4780-bch drivers from devicetree on the JZ4725B and JZ4740 SoCs from Ingenic. Signed-off-by: Paul Cercueil --- Changes: v2: - Change 'ingenic,jz4725b-nand' compatible string to 'ingenic,jz4740-nand' to reflect driver change - Add 'ingenic,jz4740-bch' compatible string - Document 'ingenic,oob-layout' property v3: - Removed 'ingenic,oob-layout' property - Update compatible strings to what the driver supports Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt index 29ea5853ca91..a5b940f18bf6 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt +++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt @@ -6,7 +6,10 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must be children of the NEMC node. Required NAND controller device properties: -- compatible: Should be set to "ingenic,jz4780-nand". +- compatible: Should be one of: + * ingenic,jz4740-nand + * ingenic,jz4725b-nand + * ingenic,jz4780-nand - reg: For each bank with a NAND chip attached, should specify a bank number, an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank). @@ -72,7 +75,10 @@ NAND devices. The following is a description of the device properties for a BCH controller. Required BCH properties: -- compatible: Should be set to "ingenic,jz4780-bch". +- compatible: Should be one of: + * ingenic,jz4740-ecc + * ingenic,jz4725b-bch + * ingenic,jz4780-bch - reg: Should specify the BCH controller registers location and length. - clocks: Clock for the BCH controller. -- 2.11.0