From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: Re: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type Date: Tue, 5 Feb 2019 10:13:26 -0800 Message-ID: <20190205181326.GA23363@builder> References: <20190124130047.8071-1-niklas.cassel@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190124130047.8071-1-niklas.cassel@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Niklas Cassel Cc: Andy Gross , David Brown , Rob Herring , Mark Rutland , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Thu 24 Jan 05:00 PST 2019, Niklas Cassel wrote: > The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level > triggered interrupt. > > The msi_ctrl_int will be high for as long as any MSI status bit is set, > thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the > IRQ handler to keep getting called, as long as any MSI status bit is set. > > A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has > configured this IRQ incorrectly. > > Not having the correct IRQ type defined will cause us to lose interrupts, > which in turn causes timeouts in the PCIe endpoint drivers. > > Signed-off-by: Niklas Cassel Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson Regards, Bjorn > --- > arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi > index 19635f91e2c4..48b3cb474ba0 100644 > --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi > +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi > @@ -398,7 +398,7 @@ > ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 > 0x82000000 0 0x40300000 0x40300000 0 0x400000>; > > - interrupts = ; > + interrupts = ; > interrupt-names = "msi"; > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0x7>; > -- > 2.20.1 >