[PATCH v13 09/13] ARM: dts: imx7s-warp: add ov2680 sensor node

[Rui Miguel Silva <rui.silva@linaro.org>]

Warp7 comes with a Omnivision OV2680 sensor, add the node here to make
complete the camera data path for this system. Add the needed regulator
to the analog voltage supply, the port and endpoints in mipi_csi node
and the pinctrl for the reset gpio.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
---
 arch/arm/boot/dts/imx7s-warp.dts | 44 ++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 358bcae7ebaf..58d1a89ee3e3 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -55,6 +55,14 @@
 		regulator-always-on;
 	};
 
+	reg_peri_3p15v: regulator-peri-3p15v {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3p15v_reg";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -178,6 +186,27 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ov2680: camera@36 {
+		compatible = "ovti,ov2680";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2680>;
+		reg = <0x36>;
+		clocks = <&osc>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&sw2_reg>;
+		DVDD-supply = <&sw2_reg>;
+		AVDD-supply = <&reg_peri_3p15v>;
+
+		port {
+			ov2680_to_mipi: endpoint {
+				remote-endpoint = <&mipi_from_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1>;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -319,6 +348,15 @@
 	#size-cells = <0>;
 	fsl,csis-hs-settle = <3>;
 
+	port@0 {
+		reg = <0>;
+
+		mipi_from_sensor: endpoint {
+			remote-endpoint = <&ov2680_to_mipi>;
+			data-lanes = <1>;
+		};
+	};
+
 	port@1 {
 		reg = <1>;
 
@@ -382,6 +420,12 @@
 		>;
 	};
 
+	pinctrl_ov2680: ov2660grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
+		>;
+	};
+
 	pinctrl_sai1: sai1grp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
-- 
2.20.1